2 Channel Garage Gate Remote Receiver RX MULTI 300-900MHZ AC/DC 9-30V Receiver for Garage Door Command Gate Control Transmitter
- Stock: In Stock
- Model: ST230049567
- SKU: ST230049567
$10.99
Ex Tax: $10.99
>>>Manual: Contact Us<<<
Specifications:
Operating Voltage: 9V-30V
Channel: 2.
Frequency: 300MHz - 900MHz.
Code: Rolling and Fixed code & Learning code.
Uses: garage doors, Gate Doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products, Alarm Systems etc.
Working frequency: 300-900MHz(Rolling code & Fixed code)
300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz
Can identify ALL Fixed code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning code (1527, 2240, 6P20B, 6P20D and so on), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101)
Feature:
1) Distance: 30-50 meters.（200 meters /open area）
2) Very mini size: 5.5cm*4.5cm*1.0cm.
3) One receiver can work with 400 codes.
4) It don’t interference other remotes and receivers.
5) Selector: With 8 dip switches user can make different combination for different remote brands.
6) Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.
Advantages :
Remote control selection: multi-frequency reception, compatible with domestic and foreign remote control, using 8-bit dial switch, users can choose different brands of remote control channels.
Learning remote control: The multi-frequency controller has two independent output channels, and each channel has independent learning buttons S1 and S2.
Way of working:
How to enter the remote control and erase all remote inputs-one or more remote controls:
(1) First, select the correct remote control brand to enter through the DIP switch;
(2) Press any learning button to turn on the LED. Press the button on the remote control, the LED flashes 4 times, this button successfully enters R-Multi.
(3) Repeat step 2 for the other button. The two channels work on the same one.
Clear all data in the memory card:
(1) Press and hold the learning button, the LED starts to light up.
(2) Keep pressing this button until the LED indicator goes out. All data in the memory card is cleared.
Package Included:
1 x Receiver Module
