3D Printer Accessories

Features: - Complete install tool kit - Suit for most of 3D printersPackage Included:..

For Kingroon KP5 Series..

Compatible:CR-6 SECR-6 MaxEnder-3 proEnder3-V2 3D PrinterWarm Tips:Not included the fan bracket!Package Included:1 x Extruder Hotend..

Overview:0. FFC soft cable 0.5 pitch 36pin, the direction is of the same direction1. P = bit = core = pin (number of copper)2. Cable length optional. 30cm, 70cm and 100cm.3. Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm)    Spacing..

Please  note:Choose the type you wanted.A = 1PCSB = 5PCSC = 10PCSD = 20PCSAssemble step:1. Put the consumables in the bag2. Seal the bag3. Put the manual air pump on the air valve to extract air4. After exhausting, remember to press it with your hand. Make the suction port flat, the sealing effect w..

Features: - Compatible with UNO, Leonardo, Mega, 101 (Intel Curie), DUE, Micro, Mini, Nano - Module supply voltage: 5v - Interface: 1 I2C / TWI two-wire data communication interface, 2 gadgeteer interfaces - I2C interface communication address: 0x20-0x27 (factory default addres..

Specifications:Applicable models: 3D printer nozzle 0.2mm / 0.3mm / 0.4mm Available models: 0.2mm / 0.3 mm / 0.4mm  (Optional, please choose the one you need) Material: Stainless steelPackage includes:1 x Nozzle-clearing drill    ,,,..

Specifications:- Type: 3010 cooloing fan- Material: Plastic- Dimensions: 30x30x10mm- Connector: 2 p (2.0) PH2.0-2P- Rated: DC: 12V- Nominal Current: 0.14 ± 10% Amp- Nominal Speed: 5500 ± 10% rpm- Air Flow: 7.9CFM- Noise: 26 ± 10% dBA- Bearing Type: Sleeve- Lifetime: 3..

3D Printer Ramps 1.4 LCD2004/12864 Controller Smart Adapter ModuleFeatures:Fits for RAMPS 1.4 smart controller LCD 2004 & LCD 12864. Can easy connect it to your RAMPS1.4 shield using this smart adapter. After connecting the panel to your RAMPS1.4 shield you can print your 3D designs without PC, ..

   Descriptions: This adapter is for Megatronics Board Smart Controller LCD 2004 & LCD 12864. If you have ever bought a Smart LCD controller for RAMP1.4 or Sanguinololu, but want to use the controller connecting Megatronics Board, you only need to buy this adapter separately,wh..

Description: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature pr..

Description:- Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next rou..