- Stock: In Stock
- Model: ST22010235
- SKU: ST22010235
【High Power】Max 710W and 6300rpm,let you polish and polish more efficiently. 【6in Self-adhesive Disk】Equipped with 150mm / 6in self-adhesive disk, you can match any 6-inch self-adhesive polishing disc on the market. 【6 Speeds Conrol】1 to 6 adjustable speed,adjust the appropriate speed freely according to various scratches. 【Self-locking Power Switch】With switch locks design, you can maintain a speed by lock down the button, greatly reducing fatigue. 【3 Meters Cable】3 meters full copper cable, enough length, convenient for construction. | |
Specification |
Material: ABS + Copper Power input: 710W No- Load Speed: 2200-6300r/min Speed Regulation: 6 Speeds Disk Diameter: 150mm / 6 inches Eccentricity: 21mm Cable Length: 3 Meters Protection Class: Class II Optional Plug: EU / US / AU / UK |
Technical Support | You can address minor faults by yourself and use the following overview: ·The power tool is not working： -Check whether the voltage indicated on the model plate corresponds with the voltage of the power supply. -Check the power tool and cables for damage. ·The motor does not reach the maximum speed. -The extension cable is too thin or too long. -The mains voltage is less than rated voltage. ·The power tool has overheated. -The air holes are clogged and should be cleaned using a damp cloth. -The power tool is overloaded. Only use the power tool for purposes for which it is suitable. ·The motor is noisy and rotates irregularly. -There is dirt in the motor or the carbon brushes are worn. The carbon brushes should be replaced if the power tool is not working. |
Package Contents |
1 x 6'' Self-adhesive Disk 1 x Side Handle 1 x 6'' Wool Plate 2 x 6'' Sponge Polishing Flat Plate 2 x 6'' Sponge Polishing Wave Plate 2 x Carbon Brush 1 x Wrench 1 x Manual |
