- Stock: In Stock
- Model: ST22000907
- SKU: ST22000907
Description:
Item Name: AR Wing Pro Special Edition
Material: High Quality EPP White
Wingspan: 1000mm (39.37'')
Length: 450mm (17.71'')
Version: KIT, PNP, PNP with NX3 3D Flight Controller (optional)
KIT Empty Weight: 340g
PNP Empty Weight: 500g
Power Combo Configuration (Not included in KIT Version):
Motor: 2216-1400KV
ESC: 40A w/5V 3A BEC
Servos: 2pcs 9g metal gear servo
Propeller: 2 blades 8x5
Recommended Battery (Not included in any version):
Lipo 4S 3200-3500mAh
ZOHD Lionpack 18650 4S2P 7000mAh
Recommended Flying Capability:
Min. Recommended Speed: 31km/h
Max. Speed (with default power combo): 130km/h
Cruise Speed (with default power combo): 75/80km/h @ 5.5A
Max. Speed Tested Without Structural Failure: 220km/h with no structural damage or twist on elevons
Max. Recommended Takeoff Weight (with SONICMODELL power combo): 1425 grams
Reflex On Elevons: 1.5-2mm at level
Recommended Max. Throws: 12mm
Features:
1.Comes with NX3 3D Flight Controller inside for stable flying (only for PNP+NX3 Version).
2.The Eachine 1st FPV Wing with dedicated nose camera bay and main hatch bay for DJI HD Air Unit System, no need any cut or DIY to fit the DJI System.
3.Aerodynamic designed FPV pocket in both sides of fuselage, with high efficient NACA air cooling system to ensure the FPV gear work in perfect condition.
4.Molded by tough EPP material, built-in CF spar for enhancement, super stable flying capability and crash resistance.
5.Extra nose and side camera bay and main hatch that compatible with all FPV and AIO cameras in the market.
6.Nose camera slot compatible with all HD Action cameras (Gopro, DJI, Runcam etc) in the market.
7.Multiple tunnels inside all quipment bays, easy to layout wire between each bay.
8.Detachable main wing and wing tip, glue-free assembly, portable for outdoor flying.
9.Built-in CF rod in the ailerons will give precision and sharp action to your inputs.
10.High accurate ball link control system brings agile and quick response in control.
11.Special-designed "servo arm built-in" structure will protect your servo arm from impact.
12.Large battery bay for extended flight time and more rooms for various Flight Controller.
13.Decent rear bay for ESC, isolate interference from other FPV equipment.
14.Built-in plate inside fuselage for extra enhancement.
15.Extra CA Hinges for DIY will bring you more stiff and agile control.
16.Optimized air-cooling design will keep your gear safe from overheating.
Specifications of NX3 3D Flight Controller:
Voltage Range: 5-6V DC
Dimensions: 40mm x 25mm
Weight: 6.5g
Features of NX3:
1.Four Model Types supported: single aileron, dual ailerons , flapperons, for delta and vtail.
2.Three Flight Modes supported:
a. Rate Mode ,Rate Mode for offset correction.
b. Hold Mode, HOLD mode for attitude hold
c. Gyro Off Mode,transsmiter control the plane directly.
3.Two kinds of Gain Control Method supported: Master Gain from the radio, Independent Axis Gain from the Variable resistor on the Controller board.
4.Using superior algorithm, Bring a more comfortable and more sensitive sense of control.
KIT Version Includes:
1x Eachine AR Wing Pro Special Edition KIT Only
KIT Package Size: 42*31*15.5cm
KIT Package Weight: 1200g
PNP Version Includes:
1x Eachine AR Wing Pro Special Edition PNP with power combo (uninstalled motor, esc, servos, propeller, and hardware.)
PNP Package Size: 42*31*15.5cm
PNP Package Weight: 1500g
PNP+NX3 Version Includes:
1x Eachine AR Wing Pro Special Edition PNP with power combo (uninstalled motor, esc, servos, propeller, and hardware.)
1x NX3 3D Flight Controller
PNP+NX3 Package Size: 42*31*15.5cm
PNP+NX3 Package Weight: 1540g
