ESP-C3-12F-Kit Series Development Board Base on ESP32-C3 Chip
- Stock: In Stock
- Model: ST230048123
- SKU: ST230048123
$7.99
Ex Tax: $7.99
Description:
The ESP-C3-12F-Kit development board is a core development board designed by ESP-C3-12F for the ESP-C3-12F module. The development board continues the classic design of the NodeMCU development board, leading all I/O to the With pin headers, developers can connect peripherals according to their needs. When using the breadboard for development and debugging, the standard headers on both sides can make the operation easier and more convenient.
Specifications:
Development board model: ESP-C3-12F-KIT
Package: DIP-30
Size (main control module): 24.0*16.0*3.1(+0.2)MM
Antenna form: compatible with on-board PCB antenna/IPEX socket
Spectrum range: 2400 ~ 2483.5MHz
Operating temperature: -40°C~85°C
Storage Environment: -40°C~ 125°C, < 90%RH
Power supply range: supply voltage 5V, supply current > 500mA
Support interface: UART/GPIO/ADC/PWM/I2C/12S
General IO ports: IO0, IO1, IO2, IO3, IO4, IO5, IO8, IO9, IO10, IO18, IO19, IO20, IO21
Serial port rate: support 110 ~ 4608000 bps (default 115200 bps)
Bluetooth: BLE 5.0
Security: WEP/WPA-PSK/WPA2-PSK
SPI Flash: default configuration 4MByte, support 2MByte version
Onboard RGB interface: IO5 connects to RGB blue LEDs; IO3 connects to RGB red LEDs; IO4 connects to RGB green LEDs
Features:
- Support Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
- Support BLE5.0, does not support classic Bluetooth, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
- RISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, has 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
- Support UART/PWM/GPIO/ADC/I2C/I2S interface, support temperature sensor, pulse counter
- The development board has RGB three-in-one lamp beads, which is convenient for the second development of customers
- Support multiple sleep modes, deep sleep current is less than 5u
- Serial port rate up to 5Mbps
- Support STA/AP/STA+AP mode and promiscuous mode
- Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS, one-click network configuration
- Support serial port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be used quickly
- Support secondary development, integrated Windows and Linux development environment
- About Flash configuration ESP-C3-12F uses the built-in 4MByte Flash of the chip by default, and supports the external Flash version of the chip.
Package Incldued:
1 x ESP-C3-12F-Kit Series Development Board
