Converter Board

Feature: This board adopts the new AD/DA chip PCF8591, which has reasonable design and stable performance.This module A/D input and D/A output are defined. The module has 4 A/D inputs and 1 D/A output:1. A/D input channel 0: connect external test;2. A/D input channel 1: one potentiom..

Description:Using AD620 as the main amplifier, can amplify uV, mV voltage. Magnification 1.5-10000 magnification, adjustable. High precision, lowoffset, better linearity. Adjustable zero to improve accuracy. Can be used for AC, DC signal amplification.Highlights:1. Wide supply voltage range, the AD6..

Overview: The pyAI-OpenMV4 adapter board is a customized adapter board for OpenMV, which allows OpenMV to have greater scalability and is compatible with the pyboard interface. It can be combined with the pyBase development baseboard for in-depth development and greater experimental functions...

Feature: Output voltage: +3.3V +5V -12V +12V +5VControl mode: toggle switch or second switch.The second switch: can be used for front panel, two pins shorted to open the power.Help voltage: +5vsb is the standby power supply, the power supply is available, can be used for standby contr..

>>>Manual: Contact Us<<<Features: Overview CH341 USB conversion module equipped with CH341 chip, CH341A is a USB bus adapter chip, through the USB bus to provide asynchronous serial port, parallel port, print and 2 line and 4 line common synchronous serial interface, the ..

Description:   CJMCU-9306 device is a dual bidirectional I2C and SMBus voltage-level translator with an enable (EN) input and is operational from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2. The PCA9306 device allows bidirectional voltage translations between 1.2 V and 5 V, without t..

Features: 1. Supports 9V battery-powered, USB-powered;2. Lightweight, easy to carry and use;3. Can generate 15 different parameters;4. Different resolutions of VGA signal, can be suitable for a variety of different performance monitors. Note: The signals listed in the tabl..

Specification:Product name: DC automatic switching + automatic chargingProduct model: YX851Control voltage: 12VControl current: 10AProduct size: 69 x 48 x 18 (length x width x height)Installation size: 61x 41 mm (4 x 3mm)Approximate product weight: 40gPackage included:1 x DC automatic switching  pow..

Feature:Material: Alloy+PCBAWeight: 39gInterface: ATX24PINLength: 10.5*4.7cmSupport system: WINXP, WIN7, WIN8, WIN10, LINUXMACPackage includes:1 x Dual PSU Riser Card..

Feature:1. Complete 802.1 1b/g/n WIFI SOC module2. Built-in Tensilica L106 ultra-low power consumption 32-bit micro MCU, main frequency supports 80 MHz and 160 MHz, supports RTOS3. Support GPI0/PWM interface4. Built-in Flash5. Adopt DIP-16 package6. Integrated Wi-Fi MAC/BB/RF/PA/LNA7. Support multip..

Feature:This downloader uses CP2104 USB to serial port chip, and adds ESP8266 automatic download circuit. It is very convenient for users to download programs, upgrade firmware, serial port debugging, etc. to Essence ESP-01/01S, support IDE, ESP8266Flasher and Espressif FLASH_DOWNLOAD_TOOLS dow..

Feature: Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: DTR, RXD, TX, VCC, CTS, GND Pitch: 2.54mm Size: 3..