M162 LCR Meter DIY Kit Resistance Capacitance Inductance Measure 1uH - 20KH Unassembled
- Stock: In Stock
- Model: ST230038391
- SKU: ST230038391
$9.99
Ex Tax: $9.99
Notice:
1. This product requires soldering.
2. The case needs to be purchased separately.
3. Please confirm that the separate shell option or DIY kit option has been selected before purchasing, the price difference is large, so as to avoid unnecessary misunderstandings.
Documents: (Contact Us)
User Manual (Rev.00)
Assembly Guide (Rev.00)
Schematic (main board)
Schematic (Analog board)
Introduction:
M162 LCR meter is a great complimentary tool to most multi-meters. Regular multi-meters are good in many way. But they usually have rather limited or even no ability for capacitance, inductance, and sub-ohm resistance measurement. The addition of a M162 LCR meter will overcome this deficiency. The DIY kit version of M162 is very easy to build. No special calibration is required to achieve ~1% accuracy.
Highlights of M162 LCR Meter:
Resistance range: 0.1ohm — 20M ohm
Capacitance range: 1pF — 20mF
Inductance range: 1uH — 20KH
Fully automatic ranging
Accuracy: about 1%
Built-in virtual USB comport for data output and firmware upgrade
Serial data output via USB comport or direct LVTTL
Display HOLD function
USB/Battery powered
Easy to build, easy to use
Optional acrylic enclosure (sold separately)
Specifications:
Display:
Primary: R, C, L
Secondary: Q, D, ESR
Equivalent Circuit Mode: Parallel or Serial
Primitive Data: |Z| and Θ, or Rs and Xs
Measurement Range and Accuracy:
R, |Z|: 0.1Ω - 20MΩ
C: 1pF - 20000μF
L: 1μH - 20000H
Q, D: 0 - 10000
Θ: -90° - 90°
Accuracy: About 1% (tested for resistance 1Ω - 1MΩ)
Measurement Conditions:
Test Frequency: 100Hz, 1KHz
Open Voltage: 0.5Vpp
Miscellaneous:
Measurement Connections: 4 Kelvin wires on the test terminals
Ranging: Fully automatic
Compensations: Open, Short
Serial Data Output: Yes
Power Supply: USB or battery
Power Consumption: < 100mA @ 5V
Dimensions: 111 x 76 x 25 mm (4.37" x 3.0" x 1.0")
Weight: 100g
Package includes:
1 x DIY M162 kit (optional)
1 x Shell only (optional)
