Upgraded 30A 12V/24V Auto Volt/Amp/Temp Display PWM Solar Panel Charge Controller
- Stock: In Stock
- Model: ST230038803
- SKU: ST230038803
$15.83
Ex Tax: $15.83
Features:
- With Voltage & Current & Temperature Display
- Support detection for the Vpmax for the panel, Not just charging voltage.
- 32 bit MCU high-speed kernel ARM CORTEX, CPU running speed 72MHz
- 13 new function LCD menu, Adjustable charging parameters.
- One-click to restore factory Settings, One-click to reboot.
- Fully 3-stage PWM charge management.
- Build-in short-circuit protection,open-circuit protection,reverse protection, Over-the-load protection.
- ST/IR/ Infineon imported dual MOS MOSFET for anti-reverse circuit
- 1oZ copper foil thickness, applicable in -35℃~60℃, high-temperature protection.
- Use ±1% high precision resistance, the high-temperature solid-state capacitor on the PCB board with thickness over 2mm.
- Ultra-low power consumption 12mA@12V.
- Double USB 5V 2A.
Applicable Battery Type:
- B01: lead-acid battery (13.7V)
- B02: lithium polymer battery (12.6V)
- B03: lithium iron phosphate battery (14.4V)
Specification of 30A Controller:
Rated Voltage: 12/24V Auto-Adaptive
Rated Current: 30A
Applicable Pmax & Voc in 12V Solar System: 390W, 15-25V
Applicable Pmax & Voc in 24V Solar System: 780W, 30-50V
Equalization: 14.4V
Float charge: 13.7V (defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
Charge reconnect: 13V
Voltage of open light: Solar panel 8V(Light lights delay)
Voltage of close light: Solar panel 8V(Light off delay)
USB output: 2 way USB output,5V/2A(Max.)
Self-consume: <12mA
Operationg temperature: -35-60℃
Size: 132mmx70mmx32mm
About the Charging & Dis-Charging Current Display:
- The controller is mainly designed for the high current solar system, The current may not display in 3 situations: Low-wattage panel, Weak sunlight, Low-wattage appliance.
- The display is more accurate when the current is higher (>1A).
About the Temperature Display:
Charging will stop at >80℃
Charging will restart at <70℃
System connection:
1. Connect the battery to the charge regulator-plus and minus.
2. Connect the photovoltaic module to the regulator-plus and minus.
3. Connect the consumer to the charge regulator-plus and minus.
Package included:
1 x PWM Solar Charge Controller 30A
1 x User Manual
