Battery Protection Module

Note: Ternary lithium and lithium iron phosphate boards cannot be mixedOverview:This protection board is a lithium battery protection board specially designed by us for high-current lithium phosphate, ternary lithium battery, lithium cobalt oxide, and lithium manganate battery packs for ship, machin..

Note: Ternary lithium and lithium iron phosphate boards cannot be mixedOverview:This protection board is a lithium battery protection board specially designed by us for high-current lithium phosphate, ternary lithium battery, lithium cobalt oxide, and lithium manganate battery packs for ship, machin..

Scope of Application: lithium iron phosphate, ternary lithium battery, lithium cobalt oxide, lithium manganese oxide battery pack.Overview:This is a lithium battery protection board specially designed for high-current lithium phosphate, ternary lithium battery, lithium cobalt oxide and lithium manga..

Specification:Product Name: 3 string 12.6V 60A lithium battery protection board Charging voltage: DC 12.6V~13.6VContinuous discharge current: 60A maximum (if the heat dissipation environment is not good, please reduce the load current)Continuous charging current: up to 20ABalance Version  Product si..

Technical parameters:Operating voltage 1.8V-4.5V, suitable for Li-ion LiFePo4 LTO.Working principle:capacitive degree of fly transfer charge porter, equalizer board connected to the battery will be above the start of equalization work, using the original new ultra-low internal resistance MOS, 2OZ co..

20A 3S 4S 5SLithium Battery Protection BoardFOR Li-POLYMER LiMnO Protect Parameter (3.6V / 3.7V)Single Cell overcharge protect voltage: 4.23-4.28VSingle Cell overcharge rotect recover voltage: 4.08-4.18overcharge protect delay: 0.5-1.5SSingle Cell over-discharge protect voltage: 2.72-2.88VSingle Cel..

13S 48V Lithium Battery 3.7V Power Protection Board 15A -180A with Temperature Protection Equalization Function Overcurrent Protection BMS Battery Protection BoardBMS is for battery use, different strings are not compatible.E.g: 13S BMS, can not be used for 10S battery, can only be used on 13S batte..

Features: Charge voltage: 14.6VCharge current: 50 - 150ASingle cell balance current: 0.07ASingle battery consumption: 25uASingle cell balance voltage: 3.6VOvercharge protection  / over-discharge protection / over-current protection /short circuit prtectionContinuous current: 100-300A (Optional, 1 fl..

Specification: Model: CF-4SCT12A-AProduct name: 4S 16.8V 6A Same Port Lithium Battery Protection BoardDischarge current: 6ARated voltage: 16.8VCharging current (Same port): ≤5AMain circuit conduction internal resistance: ≤30MΩCharging voltage: 16.8VShort circuit protection: 300USWorking temperature ..

Specification: Model: CF-4S15A-AProduct name: 4S SANYUAN 14.8V 12A Same-port Lithium Battery Protection BoardDischarge current: 15ARated voltage: 14.8VCharging current (Same-port): ≤10AMain circuit conduction internal resistance: ≤30MΩCharging voltage: 16.8VShort circuit protection: 300USWorking tem..

Feature: 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balance..

5A/8A Ternary Iron Lithium Battery 4-24 Series Active Balance Board Pressure Difference Balance Capacity Repair Protection Restorer Transformer Inverter Active Equalization ModuleFeatures and advantages:1. Nano amorphous isolated fully symmetrical transformer ensures the minimum voltage difference:2..