Driver Module

Features:  Reverse voltage protectionOver current protectionEasily wiringVoltage 5-12V can turn, the higher the faster, maximun reach approx. 10000rpmSuitable for hard brushless motor, brushless motor drive and other miniature 3-wire or 4-wire brushless motor without hall. Spec..

Specifications: Input voltage:  AC110V-220VOutput voltage: DC 21V-45VOutput current: 280-300mA(adjustable)Product size: 27*17*9mmWorking temperature: Ta: 50 TC: 75Efficiency: ≥87%Power factor: 0.9Product application: spotlight PAR light / bulb light / candle 1ight / etc...

Features:High-sensitivity 6E2 cat eye tube driver board, adding a level of input amplifier circuit, can be connected to the power amplifier audio signal input terminal and power amplifier audio signal output terminal, adjustable resistor VR1 to adjust the input signal amplitude, VR2 to adjust the ca..

Interface Description:1. VM: The power supply of the drive module is input according to the parameters of the motor, and the measured range is 7.6~40V2. VCC: Connect to 5V input, do not input 3.3V, otherwise it will affect the performance3. GND: is the ground pinControl example (when the above 3 pin..

Description:This DC-AC Inverter was developed for 1CCFL lamps of LCD back lighting system.High performance low consumption special operating temperature,Open lamp protection,Lamp Current Balance Control .The DC to AC back-light inverter is special designed on any type LCD display in implement (Is su..

Specifications: Drive plate type: JYQD_V6.3E1Voltage range: 12V-36VPeak current: 20ADrive power: ≤ 500W (related working voltage)Size: 63 x 43 x 17mmSpeed control function: voltage speed regulation Package included: 1 x DC 12V-36V 500W High Powe..

Introduction:EG8010 is a digital, function very well bring their own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer Boost architecture, an external 12MHz crystal oscillator, to achie..

Manual: Contact UsFirmware: Contact UsNote: M3663.03B is not support Dolby Audio AC3 function.Feature:1. M3663.03B is a multi-purpose and energy-efficient LCD TV control board with single/dual 8bit LVDS interface, the resolution of LCDTV panel is up to 1920*1080.2. M3663.03B supp..

Features:1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors 2.Built-in TSD, without worrying about motor stall 3.Ultra-small size, suitable for assembly and carSpecification:1.Module supply voltage: DC 2V-10V 2.Signal input voltage: DC 1.8-7V 3.Single wo..

Features:Using original IRF520 power MOS tube, can adjust PWM outputCan let the Arduin0 drive up to 24 v load, such as LED lights belt, dc motor, micro pump, solenoid valveBy PWM adjustable can realize stepless dimming LED, motor stepless speed regulationThe product instructions:PWM signal for high ..

Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a ..

Feature:Hallless brushless ESC drive, originally used for brushless angle grinders, the power is definitely much larger than that of electric drills, it is estimated that the drive is about 500W, the internal drive is 12 ToshibaTPCA8057 power MOS tubes, the drive is fully sealed and glued, and the a..