Motor PWM Speed Controller

Feature:The performance of this driver is not comparable to those of L298 motor driver chips. This driver pays attention to current and efficiency, and effectively exerts motor power and battery life. Can withstand large current overload, the maximum current can reach 30A.This driver also has a brak..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Specification:Working voltage: DC6-30VWorking temperature: -10-40°Rated current: 12AMaximum power: 360WWorking frequency: Normal mode: 1Hz ~150KhzFine Mode: 1Hz ~ 15KhzDuty cycle accuracy: normal mode: 1%~100% (accuracy 1%)Fine mode: 0.1%~100% (accuracy 0.1%)Soft start: 00.0 ~ 99.9 secondsSoft stop:..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Specification:Input voltage: DC 6-60VOutput voltage: linear loadOutput current: 0-30AContinuous current: 20ASpeed control mode: potentiometerSpeed range: 0 -100%Control frequency: 15KHzWiring type: fence terminal knobLength: 18CMSize: 96mm * 61mm * 34mm Note: The input voltage must be positive and n..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Feature:Working voltage: 3.3V-6VRated voltage: 4.8VRated current: 200maStall current: 700maSlip current: 450maTorque:..

With positive and negative switch, potentiometer knob with switch, you can use PLC to control positive and negative.Specifications: Input voltage: DC10-50VOutput voltage: linear under loadOutput limit current: 40A (use 20A for a long time, pay attention to keep the module smooth and heat dissipation..

Specification:Working voltage: DC6-30VWorking temperature: -10-40°Rated current: 5AMaximum power: 150WWorking frequency: Normal mode: 1Hz ~150KhzFine Mode: 1Hz ~ 15KhzDuty cycle accuracy: normal mode: 1%~100% (accuracy 1%)Fine mode: 0.1%~100% (accuracy 0.1%)Soft start: 00.0 ~ 99.9 secondsSoft stop: ..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

60A DC Brush Motor Speed Controller Forward Reverse PWM Control Pulse Width Speed Digital Display 10-55V/3KW for Arduino - products that work with official Arduino boardsThe main purpose: 1. All kinds of general-purpose DC brush motor speed control2. Various types of automoti..