- Stock: In Stock
- Model: ST22001685
- SKU: ST22001685
Available Options
Specifications:
Item Name: F-01 Ultra Delta Wing
Version: KIT, PNP, PNP Professional Version, PNP+Flight Controller (optional)
Material: EPP/ABS/Carbon Fiber
Wingspan: 690mm
Height: 88mm
Length: 415mm
Max Endurance: >70 minutes
Max Mileage: >45km
Min Flight speed: <27km/h
Maximum Flight speed: ≥220+km/h
KIT Weight: 150g(epp-30)/190g(epp-20)
Take Off Weight: 350g~850g
Battery Compartment: 175mm*175mm*55mm (Max dimension)
ESC Compartment: 70mm*38mm*20mm (Max dimension)
Note: when speed is≥100km/h, should install lens cover to prevent excessive inflow air form blowing awa the hatch.
Recommended Fuselage Protective Bottom Skid Case
2205 Motor Specifications:
Product Name: FX-2205-2350KV
Dimention: 29mm*20mm
Slot/pole: 12N14P
Shaft Diameter: 5mm-Internal gear M3
Weight: 30g (exclude wire)
Max Current: 30A
Max Power: 450W
Work Voltage: 2S (7.4V)~4S (14.8V)
Wire Specifications: 20# - 180mm
Interphase Internal Resistance: 68mΩ
Max. Thrust: 922g(6*4E 2-Blade Propeller)
FX35A ESC Specifications:
Product Name: FX-35A Brushless ESC
Rated Current: 35A ( lasts for 180 seconds)
Instantaneous Current: 50A ( lasts for 10 seconds)
Input Voltage: 7 4V~14.8V (2S~4S)
UBEC Output: NO
Dimention: 48.5*14.5mm ( exclude wire)
Signal Wire: 120 mm
Power Input Wire: 18#, length: 100mm
Weight: 9.5g ( include wire)
GDW 12g Servo Specifications:
Item Name: DS031MG Metal Gear Digital Servo
Voltage Range: 4.8V-6V
Working Temperature: -20℃ ~+60℃
Working Frequency: 1520μs/333Hz
Speed: 5V = 0.13sec/60°, 6V = 0.11sec/60°
Torque: 5V = 2.25kg/cm, 6V = 2.7kg/cm
Wire Length: 260mm
Weight: 12g
UBEC Specifications:
Item Name: MAMBA UBEC 5V 2A
Input Voltage: 7.4V-14.8V
Output Voltage: 5V
Output Current: 2A
Dimension: 17x11mm
Weight: 1g
VTX Fixed Seat Specifications:
Item Name: VTX Fixed Seat
Material: ABS
Seat Install Size: 47mm x 17mm
Flight Controller Install Size: 30.5mm x 30.5mm / 20mm x 20mm
Features:
- Independent detachable lens plug for both FPV and visual observation flights
- Wings have embedded carbon fiber rods with different angles
- Small wingspan with large space for electronics electronics
- Four magnets are applied to the hatch for better fastening
- The new wingtip design supports vertical take-off mode
- Supports horizontal and vertical battery mounting
- Tailored lens ring for better protection
- All new propeller locking method
- Tailored for DJI Digital Air unit
KIT Version Included:
1x Hee Wing Ultra Delta Wing EPP Body
2x VTX Fixed Seat
1x Hardware Kit
1x Lipo Strap
1x 6x4E Prop
1x 5x5E Prop
PNP Version (Unassembled) Included:
1x Hee Wing Ultra Delta Wing EPP Body
2x VTX Fixed Seat
1x Hardware Kit
1x Lipo Strap
1x 2204-2200KV Motor
1x FTC 20A ESC
2x 9g Plastic Gear Digital Servo
1x HEE Wing RX-1.0 Flight Controller
2x 5045 Propeller
PNP Version Professional Edition (Unassembled) Included:
1x Hee Wing Ultra Delta Wing EPP Body
2x VTX Fixed Seat
1x Hardware Kit
1x Lipo Strap
1x FX2205-2350KV Motor
1x FX35A ESC
2x GDW 12g Metal Gear Digital Servo
1x Diatone 5V 2A UBEC
1x XT60 + 3.5 Banana Plug
PNP+Flight Controller Version (Unassembled) Included:
2x VTX Fixed Seat
1x Hardware Kit
1x Lipo Strap
1x FX2205-2350KV Motor
1x FX35A ESC
2x GDW 12g Metal Gear Digital Servo
1x Diatone 5V 2A UBEC
1x XT60 + 3.5 Banana Plug