GT2400 2400mm Wingspan Balsa Wood RC Airplane Glider KIT/PNP

The GT2400 balsa electric glider is a newly launched electric glider with a wingspan of 2.4 meters from the G.T.RC. The new model continues G.T.RC's consistent design concept: easy to install, easy to use, good flying experience.

It adopts thin-wall glass fiber head, carbon fiber silo cover and carbon fiber tail pipe. The wing adopts a carbon fiber main beam, a carbon tube pin, and a three-stage interposing structure design, which is convenient to carry; and adopts a thinner and optimized airfoil, which greatly improves the penetration performance and the gliding performance. The accessories use a large number of carbon fiber parts, and the tail part adopts a cable torsion spring design, which is well-returned and lightweight. While improving the quality, it reduces the weight of the fuselage and improves the performance of glide to meet the requirements of hot air gliding and leisure flight.

The power adapts to a wide range. The common 2212 level power can meet the flight requirements, reducing the cost of power electronics. For model friends who are pursuing climbing, it can be applied to a variety of higher and newer shaft motors with an outer diameter of 28. The choice is wide, and it can adapt to most of the power in the hands of the majority of glider enthusiasts.

The fuselage servo can use ordinary 9g servo.

Ailerons and flaps servos can be used including KSTx08, GDW1906, KINGMAX KM1026 and other ultra-thin servos with a thickness not exceeding 8mm.

Specifications:

Item Name: GT2400

Material: Balsa Wood

Color: Red+White, Blue+Red+White (optional)

Version: KIT, PNP (optional)

Wingspan: 2400mm

Fuselage Length: 1130mm

CG: About 60mm backward from the leading edge of the wing (adjusted according to the weather and wind)

Recommended Parts (Not Included):

Motor: 2212 KV980 Brushless

ESC: 30A

Propeller: 10x6 folding
Servo: 9g *2pcs, Customized HV digital metal servo *4pcs

Battery: 3S 11.1V 800mAh LiPo

Charger: Balance Charger
Radio System: 2.4G 6CH 

Note:

KIT Version means airframe only,does not include motor,esc,servo,propeller,battery,charger,transmitter,receiver,glue.

PNP Version does not include battery,charger,transmitter,receiver,glue.

Package Included:

1x GTRC GT2400 2400mm Wingspan Balsa Wood RC Airplane