UV Ozone Lamp Sterilizer 110V 36W Timming Remote Control Cleaning Tool UV Lamp

Note:
Do not look directly at the disinfection lamp during using! Do not enter the disinfection area during disinfection! Ventilate at least 30 minutes after disinfection!

UV disinfection method:

 

1. Air disinfection: Please close the doors and windows during use. The room should be kept clean and dry. The timer will start after the lights are turned on for 5-7 minutes. The effective distance will not exceed 2 meters. The disinfection time will be 30-40 minutes each time. Turn on, and then turn on again for an interval of 3-4 minutes. During the ultraviolet light irradiation, personnel are strictly prohibited from entering the room. Ozone will be generated during ultraviolet disinfection. Open the window and ventilate after the irradiation. When you must enter, stop the ultraviolet disinfection lamp.

 

2. Disinfection of the surface of the item: Spread or hang the item to make it fully exposed to direct exposure. Ultraviolet rays cannot penetrate the object. When disinfecting the surface of the object, the distance between the lamp tube and the contaminated surface should not exceed 1m. When the intensity meets the requirements, the irradiation time shall not be less than 30min. High-intensity, low-ozone UV germicidal lamp, 30min ~ 60min irradiation within effective distance.

Specifications:

Parameter
Size	14*14*44cm
Coverage	<44㎡
UVC	254nm
Cable Length	2.5M
Function	Timing, 3 Level Adjust, Delay start