10Set Balustrade Cable Fixing Kit Stainless Steel Lag Screw Swage Terminal
- Stock: In Stock
- Model: ST230040617
- SKU: ST230040617
$38.87
Ex Tax: $38.87
Specifications:
Material: 316 Stainless steel
Color: Silver
Size Approx.:18.5*0.5cm
Fecture: 1. Made of Stainless steel,high tensile and anti-fatigue strength, and weather protection.
2. These stainless steel fittings surface mount a traditional DIY cable railing into wood.
3. Perfect for small DIY cable railing project to big scale indoor and outdoor applications.
Application: 1. One end of the run uses a Right Hand Thread (RHT) 5mm Terminal Lag Screw to attach to the post or wall.
The other end uses a Left Hand Thread 5mm Terminal Lag Screw to attach to the other post or wall.
Tension is achieved because of the different threads (the entire wire when built becomes a turnbuckle)
2. The fittings must be either hydraulically swaged with a press or a hand swager to a wire run of 3.2mm Stainless
Steel wire rope. With these types of fittings, to calculate the overall length of Wire Rope needed for the job, the
length of a wire run is measured from 'inside post' to 'inside post'. In order to cut the wire the correct length, the
wire is cut 47mm shorter than the inside to inside post distance.
(But we recommend that you measure, cut and install a wire before you go completely wild.)
Packaged included: 10pack screw swage
Color: Silver
Size Approx.:18.5*0.5cm
Fecture: 1. Made of Stainless steel,high tensile and anti-fatigue strength, and weather protection.
2. These stainless steel fittings surface mount a traditional DIY cable railing into wood.
3. Perfect for small DIY cable railing project to big scale indoor and outdoor applications.
Application: 1. One end of the run uses a Right Hand Thread (RHT) 5mm Terminal Lag Screw to attach to the post or wall.
The other end uses a Left Hand Thread 5mm Terminal Lag Screw to attach to the other post or wall.
Tension is achieved because of the different threads (the entire wire when built becomes a turnbuckle)
2. The fittings must be either hydraulically swaged with a press or a hand swager to a wire run of 3.2mm Stainless
Steel wire rope. With these types of fittings, to calculate the overall length of Wire Rope needed for the job, the
length of a wire run is measured from 'inside post' to 'inside post'. In order to cut the wire the correct length, the
wire is cut 47mm shorter than the inside to inside post distance.
(But we recommend that you measure, cut and install a wire before you go completely wild.)
Packaged included: 10pack screw swage
