110V 4L Pure Water Distiller 750W Stainless Steel Purifier Filter Machine w/ Glass Container

Plug Standard: US Plug
Rated Frequency: 60HZ

Power Rating: 750W

Volume: 4L

Degree of Evaporation: 1L/H

Over-Temperature Safe: Cut Off at Temperature of 160°C

(NOTE: The rated voltage of this product is 110V, please confirm that the voltage used in your country is 110V before purchasing. If you are using 220V voltage in your country, please buy an Voltage Converter (220V to 110V) Additionally and use it together, otherwise the product will Burn Out.)

- Stainless Steel Water Distiller Machine for home, hospital, laboratory and offfice

- Easy to operate, no installation required

- Produces water of the safest and cleanest condition

- Seamless round shaped exterior

- Durable, yet lightweight and compact enough to travel with

- Effectively removes most tap water impurities

- Water glass container included

Set up:

1. Unpack the box and take out the water distiller. There are two parts of it, Top Cover and Machine body. Lift the top cover up and take out the water bottle.

2. Lift the top cover up and fill the stainless tank with water up to the maximum water level. Please note that do not exceed the maximum water level (Time of water distilled can be reduce if filling with hot water).

3. Place top cover on the machine body and make sure the silicon seal is correctly in place around the entire rim. Make sure the unit is on a stable surface . Then plug the power wire of the top cover into the machine's body.

4. Set up storage bottle; Connect the main power wire with machine body and plug in the electric outlet. Press "Starting Button", the fan and distilling process will begin.

5. Water will begin to drip into the storage bottle after approximately 30 minutes. It will take approximately 4 hours to distill 4 Liters of water(depend on local environment and temperature). The unit will automatically shut down when the process is finished.

6. After water bottle is fully filled with distilled water, but starting button still in power. For safety sake, please let the wole distiller cool down first and take offf the top cover after 10 minutes and refill the tank with water, put the top cover back stably and connect the powr wire, the distiller is reliable and safe under 24hrs process.

7. Don't drink the first bottle of the stilled water. It will take on distilling cycle for the unit to do self-cleaning.

Cleaning:

1. Rinse and wipe out tank everyday using clean water and keep it dry.

2. Inside of stainless tank must be rinsed and cleaned by water. Calcification and scale will build up on bottom of the tank and should be removed every month by using specific cleaning agent.

3. The water bottle can be washed with hot water. It will not become deformed.

4. Please take off the filter every 2-3 months in order to remain the purity of distilled water.

Package Included:

1 x Distiller

1 x Water Container

1 x Discharge Cap

1 x Bottle Cap

1 x Filter

1 x Main Power Cord

1 x Chamber Cleaning Powder

1 x User Manual

,,,,,