- Stock: In Stock
- Model: ST220013296
- Dimensions: 16.00cm x 11.00cm x 6.00cm
- SKU: ST220013296
Feature:
1. Designed for general-purpose laser engraving, laser cutting, 3D printer and other CNC equipment.
2. 3.3-12V TTL adjustable power.
3. Wide application, 3 kinds of input interface design, DC12V+TTL, 3Pin 2.54 interface, 3pin connection port.
4. 30W electric power, 7.5W optical power output, can be directly upgraded on the basis of NEJE Master2 20W, if it is 7W and 3500mw customers need to replace the 12V3A power adapter.
5. Fixed focus design, you only need to pad a 6mm spacer on the bottom and lock the screw to adjust the focus
6. The size of 30mm does not affect the engraving area of NEJE Master2.
7. vision protection.
8. Modified laser air assist.
9. Intelligent drive, able to detect temperature and dynamically adjust the fan speed, making it quieter when not in use.
10. 15000 rpm double ball high speed fan, stronger heat dissipation performance.
11. 60mm built-in threaded copper core, add heat dissipation silicone grease, safe temperature control, NEJE 48-hour aging test.
12. 2 years warranty, free replacement.
Specification:
Model | NEJE Module 30W |
Heatsink Material | Aircraft Aluminum + Brass Shell |
Luminous Color | Blue |
Section Size | 40mm x 40mm |
Cooling Mode | Temperature sensor intelligent control + 10000 rpm 40mm cooling fan |
Volume | 16x11x6 cm |
Adapter Plug | 5.5 2.1 port |
Can Engrave | MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum |
Can Not Engrave | Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material |
Technical Parameters | |
Module Input | 20-30W |
Optical power output | 7.5W (7500mW) |
Wavelength | 445-450nm |
Beam Shape | Dot (Focusable) |
Working Voltage | DC 12V |
TTL&PWM Modulation | YES, Compatible with Both TTL & PWM Modulation |
Input Voltage | DC12V 3A |
PWM/TTL Input | DC3.3V-12V |
Input Interface | PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-) |
NOTE | Temperature interface can be disconnected，NEJE provides text instructions for temperature acquisition on wiki. |
Drive Mode | External ACC |
Safe temperature range | <60 ℃ |
Gross weight | 430g |
Life Time | 10000-20,000 hours |
Digital PWM Wave Pulse Signal Generator Adjustable Frequency Duty Cycle for NEJE Laser Module tester board Specification | |
Power input | DC 12V |
Output | PH2.0 4pin (12v,GND,PWM/TTL,Temperature) |
Mode | 3 modes (off, manual pwm, pwm / ttl in) |
Temperature display | YES |
Pwm display | Yes |
Manual PWM control | YES |
Package Included:
1 x | 30W single module |
1 x | Sliding card slot |
1 x | L wrench |
1 x | L-shaped small wrench |
1 x | interface adapter board |
1 x | 4pin laser line |
1 x | 3pin 2.54 interface output cable |
1 x | 2pin ttl control line |
