- Stock: In Stock
- Model: ST220033681
- SKU: ST220033681
Sensitive PIR Motion Sensor Strip Light Cabinet Lamp with Automatic & Manual 2 Switch Modes Remote Battery Powered Operated 60LEDs/m SMD2835 For Bedroom Kitchen Wardrobe Cabinet Closet Cupboard
Feature:
- DIY Length : It can also be cut to the length you needed by cutting on the yellow mark line.
- 2 Modes Control & 3 sections of dimming
- Wide range of induction distance is 2-5 meters and its sensing angle is 100°.
- 60pcs SMD2835 high quality LED beads, long lifespan, flicker-free and anti-glare light without strobes and radiation, it can keep your eyes away from exhaustion.
- IP66 Water resistance for providing you a better experience.
- Equipped with strong adhesive both on the back of remote control and LED strip allow you to quickly mount it wherever you need.
Specifications:
Working voltage: DC6V
Power: 2.4w
LED type: SMD2835
LED quantity: 60pcs/m
Light Angle: 120°
Luminous flux: 180±10%lm
Lifespan of LED: 35,000 hours
CRI: ＞80ra
Light color: Warm white (3000k) / white (7000k) (optional)
Length of light strip: 1/2/3/5 meters or DIY
Water resistance of light strip: IP66
Sensing distance: 3-5 meters/ 9.8-16.4ft
Sensing angle: 120°
Delay time: 15s
Battery: 4 * AAA battery (not included)
Operation Temperature: -20℃~+35℃
Storage Temperature: -25℃~+55℃ (25℃ is best-fit)
Material: ABS
Item color: White
Remote size: 13.6 * 3 * 2cm/ 5.4 * 1.2 * 0.8in (L * W * H)
Notes:
1. The batteries are not provided.
2. The remote control is non-waterproof, please use it carefully.
Package include:
1 * Remote
1 * Light strip
2 Modes Control & 3 sections of dimming
The sensor box has two modes, which are divided into a constant light mode and a sensing mode. There is a button switch on the front side. When the button is pressed, a red light is turned on to the constant light mode, and then the red light is turned off to be the sensing mode.
- In the sensing mode: when the person is within the sensing distance, the light source light strip will light up, and when the person leaves the sensing distance, the light strip will automatically turn off after a delay of 20 seconds. In the face, there are only one switch for day and night. When you choose daytime, you can sense the human body during the day and night. When you choose nighttime, you can only sense the human body at night or in the dark. If you keep sensing the distance, the light will not be Destroyed.
- Dimming mode: There will be a push switch on the sensor box, which is divided into 3 sections of dimming, and the switch can hold the brightness that you want.
