- Stock: In Stock
- Model: ST22001434
- SKU: ST22001434
New upgrade :
1. Integrated injection molding material, beautiful, solid and reliable, reasonable structure, lighter.
2. 2-3s flight control system with sh50a has its own black box.
3. Caddx baby turtle whoop 1080p HD is used as the camera lens, and the unique ND filter is added to effectively control the jelly in the picture
4. The upgrade adopts 400MW VTX image transmission, which is more distance and more stable.
5.Adjustable flight control of RGB LED lamp
6. The new design of the aerodynamic layout makes the take-off downforce greater. It's easier to circle in the air.
7. Adopting 2020 four blade ducted propeller has higher efficiency and more stable hovering stability at low torsion.
8. The newly added propeller protector can effectively protect the propeller and avoid accidents as much as possible
Description:
Mode Name: LIGO78X PRO V2 ( 1080P HD)
Item Name: 78mm 3S Ducted CineWHOOP Drone
Wheelbase: 78mm
Size: 119x132x23mm（Camera mount not included）
Weight: 73g(Camera mount not included)
Color attribute: Italian red
Motor | Motor Mode: GL1202 KV8700 Stator specifications: D12 * H4 0.2mm Kawasaki Configu-ration: 9N12P Stator Diamter: 12mm Stator Length: 2mm Shaft Diameter: Φ1.5mm WindingSpecifications: 180℃ Class Multiple oxygen-free copper Weight(g): 3.4g No.of Cells(Lipo): 2S-3S |
Flight controller | Name: SH50AF4 MATEKF411 MCU: STM32F411CEU6 (100MHZ, 512K flash memory) Sensor: MPU-6000 (SPI connection) Shop: 8MB black box onboard Board size: 28.5 * 28.5MM Power supply: 2-3S battery input (DC 7-12.6V) Built-in 5A (each) Blheli_S 4 in 1 ESC Dshot600 ready Built-in Betaflight OSD (SPI control) Built-in 5V 2A BEC Built-in voltage detection |
Onboard 4in1 ESC | Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) Current: 5A continuous peak 7A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 Power input: XT30 |
Frsky NON-EU RX Version | SBUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware upgrade-able, can be upgrade to EU-LBT with RSSI |
TBS NANO receiver version | CRSF Protocol , Official TBS transmitter compatible Protocol: CRSF Channels: 8ch Failsafe support Support receiver hardware rssi function No ground interference ( Transmitter and receiver 1 m from the ground): >500m |
PNP NO receiver version | Support any bus and other protocols, users can install by themselves |
| 5.8G VTX | Power switching: third gear(25MW 、 100MW 、200MW、400MW) Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels Weight: 2.0g |
Camera | Name: Caddx baby turtle whoop version Resolution: 800TVL Video standard: 1080p 60fps Field of view: 170 degrees Screen size: 4:3, 16:9 Maximum supported recording capacity: 64g u1 Power supply: 5v-20v Current: 12v / 160ma Weight: 9g |
Propeller | Gemfan 2020 Material: PC Weight: 0.91g Props Dia: 50.3mm Center Thickness: 5mm Center Hole Dia: 1.5mm 3 holes |
Battery recommended ( NOT Included) | Species: lipo、lipoHV Capacity: 450-550mah Voltage: 7.8-11.1v Continuous Discharge Rate: 60C Instantaneous discharge rate: 80C Connector: xt30 |
Package Included:
1x Second generation injection molding frame
4x GL1202 KV8700 Motor
1x 2020 propeller(4cw+4ccw)
1x 5.8G GVTX400 (25-400MW)
1x RGB LED
1x Caddx baby turtle whoop 1080p HD
1x Screwdriver removal tool
2x Battery magic strap
2x Propeller protector
1x Bag
