Menu
Your Cart

DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester

DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
DF3-D DC Current Monitor Red LED Display Digital 3 1/2 DC50/100A Ammeter Instrument Meter Tester
  • Stock: In Stock
  • Model: ST22011823
  • Dimensions: 65.00mm x 96.00mm x 48.00mm
  • SKU: ST22011823
$22.99
Ex Tax: $22.99

Available Options

Features:


  • Accurate measurement
  • Easy operation
  • High precision
  • Settable current ratio
  • Strong anti-interference
  • Widely used in electronic measurement, industrial automation control.
  • There is a high-quality fixing frame to prevent loosening and long-term fixation.


Specification:


Display range

DF3 four digits -1999~ +3300

Sampling times

2~128 times/second (s), factory setting 4 times/second (s)

Measurement accuracy

DF3-D: soil 0.5% F.S ±2Digit

Display

Red LED (14.2mm H)

Frequency range

45Hz~60Hz(max)

Polarity display

positive and negative reading display

Weight

about 350g

Power supply

AC110V/AC220V. 50/60Hz (other power supply methods can be selected)

Power consumption

about 3VA (220VAC 50Hz)

Temperature and humidity resistance

0~50°C 35%~85% RH

Withstand voltage

AC2KV, 1 minute between power/input/output

Size

W96 x H48 x D65mm

Installation

plate type


DF3-D DC Ammeter

Current

Resolution

Test Range

DC300.0uA

0.1uA

-200.0uA---+300.0uA

DC3.000MA

0.001MA

-2.000MA---+3.000MA

DC30.00MA

0.001MA

-20.00MA---+30.00MA

DC300.0MA

0.1MA

-200.0MA—+300.0MA

DC3000MA

1MA

-2000MA---+3000MA

DC5.00A

0.01A

-2.000---+3.000A

DC3.000A

0.001A

-2.000A—+3.000A

DC5.00A

0.01A

-5.00A—+5.00A

DC10.00A

0.01A

-10.00A---+10.00A


Note: If it is greater than DC10A, a shunt test is required, and the shunt is separately equipped.


Change set value:


  • Enter: Press the ⟲ key for 3 seconds, the meter will enter the function setting menu mode.
  • Change: Press ︽ or ︾ to enter the next setting item. Press the key to move the cursor to the left and the digits will flash cyclically.
  • Press ︽ or ︾ again to modify the value of the flashing digit. After modifying, press ⟲ to confirm and save.
  • Exit: When the setting is completed, press ⟲3 seconds to exit, and the instrument saves the changed setting parameters.
  • If no button is operated for 30 seconds, the meter will automatically exit the parameter setting mode.
  • The modified parameters will be saved.


Package included:


  • 1 x DC Ammeter


Note:
[1] Please do not use in the following environments: places where temperature and humidity changes too much; places where vibration is very strong, places where corrosive oxygen or dust exists; places where water, oil, and chemicals splash; easy to explode and flammable gas.
[2] Before connecting the power supply, please make sure whether the voltage is within the rated range and whether the wiring terminals are positive Yes, otherwise it may cause serious damage to the instrument.
[3] The input wire should not be too long, it is better to use shielded wire.
[4] Keep the wiring junction away from high-voltage, high-current power supply lines to avoid interference, please confirm that the wiring is connected to the correct terminal.
[5] Before use, the meter needs to be energized and preheated for 15 minutes; the suitable use environment temperature is 0~50°C.
[6] Please note that the shell of the body will be corroded by organic solvents, strong acids and alkalis.
[7] It is strictly forbidden to disassemble, modify and repair this product, otherwise it will not be guaranteed.


Details pictures:




DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-1

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-2

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-3

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-4

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-5

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-6

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-7

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-8

DF3-D-DC-Current-Monitor-Red-LED-Display-Digital-3-12-DC50100A-Ammeter-Instrument-Meter-Tester-1730047-9


Write a review

Note: HTML is not translated!
Bad Good
Captcha