MX-P50M 45W Short Wave High Frequency Power Amplifier for FT-817/ICOM MX-P50M KX3/QRP FT-818/G90S/G1M/X5105
- Stock: In Stock
- Model: ST22010945
- SKU: ST22010945
$195.99
Ex Tax: $195.99
Description:
This power amplifier can be used for QRP radio stations to increase the transmission power and improve communication quality. It can be used for fixed or outdoor mobile use. It is small in size and light in weight, with over-voltage and anti-reverse protection. The panel uses LED to display the band and emission status.
Features:
1. It can be used in QRP transceiver, which helps to increase the transmission power, enhance the signal, and improve the communication quality.
2. The body is small and compact, and portable.
3. It is fully integrated with FT-817 through the provided interface cable. The amplifier contains various protection circuits, such as high voltage and front LED display.
4. With overvoltage and anti-reverse connection protection, it can be used as a base and a mobile unit.
5. The panel uses LED to display the band and emission status.
6. Good compatibility, can be successfully used with other QRP devices, such as ICOM IC-703 (and Elecraft KX3).
Specifications:
- Working frequency: 80m 40m 30m-17m 15m-10m
- Working mode: SSB CW AM
- Input power: 5W
- Output power: 45W
- Band control: manual
- Power requirements: 13.8V 8A
- Antenna interface: SO-239 50Ω
- Size: 155*100*35mm
- Weight: 0.55KG
Package Included:
1x MX-P50M
1x Power cord
1x ACC plug (connect FT-817ND FT-818)
1x 2.5MM Plug (KX3 radio)
User manual of FT-817ND:
-Connect the power cord to the DC power supply, connect red to "+" and black to "-"
-Connect the ACC cable to the FT-817 ACC and amplifier
-Adjust the "BAND ADJ" button to select the frequency band.
-The antenna amplifier "ANT" and the "input" of the FT-817 antenna are not included. Please note that the antenna you use must be adjusted well, and the SWR must be less than 1:1.5
-Turn on the power supply and the power on the AMP.
-Turn on the power of FT-817, indicating that the frequency band on the Amp is turned on.
-Press PTT, TX means Amp must be turned on. Note that if you work in FM or SSTV for a long time, you should reduce the output power of FT-817, such as 2.5W or 1W.
User manuals of other QRP transceivers:
Connect the ACC cable to the transceiver PTT-TX and the amplifier, ACC green to "GND", red to "TX-PTT", radio "TX-PTT" to see the manual.
