- Stock: In Stock
- Model: ST230049385
- SKU: ST230049385
[Description]
UPS Plus is a new generation of UPS power management module. It is designed with “battery protection” function. The UPS can be configured to turn off the power when it detects that the battery power is low, to prevent the battery from over-discharging.
[Features]
Safe Shutdown
Battery Protection
Enhanced power management
Remote OTA firmware upgrade
Programmable BACK-TO-AC auto power up
Programmable sample period
I2C communication
Standalone RTC
Support stacked battery design
Easy to install
[Specification]
Current/voltage monitoring of Raspberry Pi power supply port.
Battery terminal current/voltage monitoring, supports two-way monitoring of charge and discharge.
Independent RTC function.
OTA function (supports forced upgrade mode and active upgrade mode).
Power estimation
Note: At least one full charge and discharge cycle must be completed!
Adjustable sampling period.
Support FCP, AFC, SFCP fast charge protocol.
Support BC1.2 charging protocol.
Battery temperature monitoring
Note: the forced temperature protection cannot be turned off, threshold: 65 degrees!
Programmable Power Voltage Detect(PVD) function, Default value: 3.6V
Incoming call self-start function.
Power down memory function.
Programmable shutdown / forced restart.
Running time statistics
Electrostatic protection.
Linear compensation range discharge capacity: 5V 4.5A.
Non-linear compensation range discharge capacity: 5V 8A.
Charging capacity 4.5V 5A/5V 2.5A/9V 2A/12V 1.5A.
Stacked battery design
Note: Stacked power b0ard need to be special accessories. Can not support None official accessories.
Use I2C communication without occupying additional ports.
Support 4.2V 4.35V 4.4V 4.5V lithium battery
Note: Different types of batteries cannot be mixed!
Wiki:https://wiki.52pi.com/index.php/EP-0136
Package Included:
1 x UPS Plus For Raspberry Pi
4 x M2.5 copper pillar
4 x M2.5 screws
4 x M2.5 long copper stick
4 x M2.5 nuts
1 x Acrylic shield
1 x Instructions
