Battery Protection Module

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document.Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 2..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document.Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 2..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document. Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your batter..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document. Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your batter..

Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 24S, you must choose 24S BMS, can not choose 20 or other one. The number of  series of BMS is  fixed ,not adjustable once the BMS is shipped out .2. All accessories and BMS are the l..

Description:Daly 20S 72V Li-ion BMS 80A 100A 120A 150A 200A Big Current for 18650 Lithium Ion Battery Pack for lithium batteryModel: DL20S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)Common Version: common port for charge/discharge Separate Version: separate port for charge/dischargeWe can..

Note：300A/400A/500A BMS with Cooling fan, others are not included.Description:Model: DL4S (3.2V rated LiFePO4 Battery not for 3.7V Rated Li-ion Battery )common Version : common port for charge/discharge separate Version : separate port for charge/dischargeWe can customize any PCB from 1S t..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document.Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 2..

Description:This product is a simple voltage controller. It can turn on and off the output by relay. It only plays the role of switching, and can not change the voltage.【Charging mode IN】By setting the upper limit voltage UP and the lower limit voltage dn; when the battery voltage is less than or eq..

Description:   B+ connected battery positive; B1 the connect point between battery 1 and battery 2; B2 connect the point between battery2 and battery 3; B3 Connect the point between battery 3 and battery 4; B- connect to battery negative end; P- + connection charge / disc..

Description:   1. Fine workmanship and durable; 2. For the rechargeable (generally refers to the lithium battery) from the protection of the integrated circuit board. Lithium battery (rechargeable type) so need protection.  3. As the lithium battery itself determines the material its..

Description:Model: DL10S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)common Version : common port for charge/discharge separate Version : separate port for charge/dischargeWe can customize any PCB from 1S to 30S lithium batteries with different current.(Quantity＞10)Highlight：For the same m..