Board & Shield

Description: RC522 chip: MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and porta..

Features:1. Intelligent identification chip type, support EV1527, PT2262 learning code / fixed code (welding code) IC remote control mixed use2. Compatible with most learning codes and fixed code (weld code) chips on the market, including EV1527, PT2262, HX2262, SC2260, SC5211, HS2240, etc.3. Intell..

Description: - Infrared IR LED boards for CCTV cameras night vision.- Power supply exceeds DC13V may greatly reduce the LEDs operating life. Specifications: LED Number:36PCSBoard Diameter:60 mm (outside) / 34mm (inside)Power Supply:DC12V / 220mA (typical)Operation Tempe..

Feature: Input/Output voltage: DC5V-24VTotal output of current: 36AOutput: 1A each channel max 3AChnannel: 36 Channel 12 GroupController: DMX512 XRL 3PWorking temperatire: -20℃ to 60℃Size: about 19.4 x 11 x 0.25cm (Conversion: 1cm=0.3937 inch, 1inch=2.54 cm) Fun..

Feature: Voltage: DC 5VColor: RGB Outer diameter 45Mm, 32mm inner diameter (Update from August 11, 2022) Package included: 3 x 16 Bit WS2812 5050 RGB LED Driver Development Board..

Specifications: Color: Green + RedDiameter: 5mmPackage Type: DiffusionVoltage: 2.0-2.5vCurrent: 10mAViewing angle: 150 degreeWavelength: 571 +644 nmLuminous intensity (MCD) :20-40; 40-80Stent type: long-legged Package Included: 3 x KY-011 Two Colo..

Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illum..

Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illum..

Description:Working voltage: 4.5V-5.5V;Interface : RS485(5V GND A+ B-)Frequency: 433MHzTransmit power: -40~+20dBm;Receiver sensitivity: -114dBm;Operating temperature: -25℃~+75℃;Transparent transmission mode baud rate :1200 2400,4800,9600(Default),19200;Open ground Transmission distance : 500MSize(wi..

Features: - Infrared illuminator board for CCTV security cameras- Replace a camera LED board for your broken or worn out IR LED board- Bright infrared LEDs without much energy consume- Suitable for camera shell of 50mm diameter- Number of IR Lamp:   850nm   48 LED F5 (F5: LED bulb ..

Specifications: Color: Green + RedDiameter: 5mmPackage Type: DiffusionVoltage: 2.0-2.5vCurrent: 10mAViewing angle: 150 degreeWavelength: 571 +644 nmLuminous intensity (MCD) :20-40; 40-80Stent type: long-legged Package Included: 5 x KY-011 Two Colo..

Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illum..