CoreInk Compatible Stackable Circuit DIY Expansion Kit Prototype Design Moudel
- Stock: In Stock
- Model: ST230045510
- SKU: ST230045510
$6.85
Ex Tax: $6.85
Description:
CoreInk Prot0 Base is a DIY expansion kit suitable for CoreInk master control. When stacking the expansion board, the IO bus on the CoreInk main control will be led out to the PROT0 board through the lower PIN pin. You can design and build the circuit according to your own needs. The package also contains a variety of expansion parts (HY2.0-4P female terminal, 3.96 male/female terminal, DC power terminal, etc.), which can be soldered to the PROT0 board, which can add standard specifications to your circuit design. Output Interface. The hook hole on the back and the LEGAO compatible hole design on the corners make it easy for you to embed the finished DIY product into a variety of structures.
Product Features:
Compatible with CoreInk
Prototype circuit design
PROT0 board
Specification:
Shell material: Plastic (PC )
Product size: 56*40*16mm
Package size: 83*54*26mm
Net weight: 34g
Gross weight: 46g
Package included:
1 x CoreInk Prot0 Base (face shell + bottom shell)
1 x Allen key
3 x HY2.0-4P socket terminals (red x1, blue x1, black x1)
4 x HT3.96R-4P pins
4 x HT3.96R-4P socket
1 x HT3.96R-2P pin
1 x HT3.96R-2P socket
1 x DC-044 socket terminal
4 x M2*6 cup head tapping screws
1 x PROT0 DIP header
3 x port block
Application:
Experimental circuit
DIY function expansion
Pin mapping:
The IO bus on the CoreInk main control will be led out to the PROT0 board through the PIN pin
CoreInk | GPIO | ADC | SCL | SDA | MOS1 | MISO | SCK | TXD2 | RXD2 | GND | 5V IN | 5V OUT | 3.3V | BAT | RST |
CoreInk | G25,26 | G36 | G22 | G21 | G23 | G34 | G18 | G14 | G13 | GND | 5V IN | 5V OUT | 3.3V | BAT | RST |
Related Links
PcbDoc
AtomPin
