- Stock: In Stock
- Model: ST230045489
- SKU: ST230045489
OP.90 and OP.180 are two limit switches with different orientation placement. Build with a ITR9606, which is consist of an infrared emitting diode and a silicon phototransistor.
They are used for controlling machinery as part of a control system, as a safety interlock, or to count objects passing a point.A limit switch is an electromechanical device that consists of an actuator mechanically linked to a set of contacts. When an object comes into contact with the actuator, the device operates the contacts to make or break an electrical connection
The actuator of this Unit is consist of a pair of IR part, emitter side and receiver side(silicon phototransistor). The IR emitter will keep sending IR wave while the receiver will keep detecting the IR wave. The IR is directly emitted from one side to another side, so if there's no object in between, the receiver side would get the IR signal. This is how it detecting a break an electrical connection.
Product Features:- Vertical Layout
- IR limit switch
- Fast re sponse time
- High sensitivity
Package Included:- 1x OP.180 unit
- 1x GROVE Cable
Application:- Door Switch
- Machinery Control
- Mouse Copier
- Switch Scanner
- Non-contact Switching
Schematic:
EasyLoader
Contact Us to download EasyLoader
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the mas ter through simple steps, and a series of function verification can be performed.
2.After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)
3.Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)
Code:
1. for IDE To get complete code, please Contact Us
