Sipeed Tang Nano 9K High Cloud FPGA Development Board
- Stock: In Stock
- Model: ST230041610
- SKU: ST230041610
$27.99
Ex Tax: $27.99
Specifications:
Logical Units (LUT4): 8640
Register (FF): 6480
Distributed static random access memory SSRAM (bits): 17280
Block static random access memory B-SRAM (bits): 468K
The number of block static random access memory BSRAM (pcs): 26
User flash memory (bits): 608K
PSRAM (bits): 64M
High-performance DSP module: support 9X9, 18X18, 36X36bit multiplication and 54bit accumulator
Multiplier (18x18 Multiplier): 20
SPI FLASH: 32m-bit
Flexible PLL resources: 2 Phase Locked Loops (PLLs)
Display screen interface: HDMI-compatible interface, SPI screen interface and RGB screen interface
Debugger: Onboard BL702chip, providing USB-JTAG download and USB-UART serial port printing functions for GW1NR-9
IO: Support 4mA, 8mA, 16mA, 24mA and other drive capabilities; provide independent Bus Keeper, pull-up/pull-down resistors and Open Drain output options for each I/O
Connector: TF card holder, 2*24P 2.54mm pin header pad
Keys: 2 user programmable keys
LEDs: 6 programmable LEDs onboard
Product size: 70 x 26mm
color:Black
Material:PCB+Metal
Features:
1. For Tang Nano 9K is a compact development board based on Gowin GW1NR-9 FPGA chip.
2. It's HDMI-compatible connector, RGB interface screen connector, SPI screen connector, SPI FLASH and 6 LEDs allow users to easily and quickly perform FPGA verification, RISC-V soft core verification and functional prototype verification.
3. The 8640 LUT4 loic unit owned by GW1NR-9 can not only be used to design various complex logc circuits, but also can run a complete PicoRV soft core, which meets the various needs of users to learn FPGA, verify soft core and in-depth design.
4. For Tang Nano 9K is developed using Gowin Yunyuan software IDE. It supports general hardware description language, and can quickly realize related work such as calling IP core, code synthesis, placement and routing, and bitstream file generation in the FPGA development process.
5. The onboard BL702 chip for Tang Nano9K development board provides USB-JTAG download and USB-UART debugging functions for GW1NR-9. Users only need to use the USB-C cable to connect the development board to the computer to complete the download operation, without the need to purchase an additional downloader and cumbersome wiring.
Package Include:
1【FPGA Board Only】:
1×Tang Nano 9K
1×2.54mm Pin
1×Type-C Data Cable
2【1.14inch Screen】:
1×Tang Nano 9K
1×2.54mm Pin
1×Type-C Data Cable
1×1.14inch SPI Screen
3【4.3inch Screen】:
1×Tang Nano 9K
1×2.54mm Pin
1×Type-C Data Cable
1×4.3inch Screen
4【5inch Screen】:
1×Tang Nano 9K
1×2.54mm Pin
1×Type-C Data Cable
1×5inch Screen
5【7inch Screen】:
1×Tang Nano 9K
1×2.54mm Pin
1×Type-C Data Cable
1×7inch Screen
