Specifications:
A single module can drive an 8 x 8 common cathode lattice
Operating voltage: 5V
Size: 5 x 3.2 x 1.5 cm (L x W x H)
LED color: red
With four screws hole, aperture 3mm
With input and output interfaces, supports multiple modules cascade
Wiring instructions:
1. The module l..
MAX7219 Microcontroller 4-in-1 Display Dot Matrix Module For Specifications: A single module can drive a 8x8 dot matrix common cathode Working voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (L*W*H) With 64 fixing screw holes, hole diameter: 3mm Module with input and output interfaces, suppo..
Description:· A single module can drive an 8*8 common negative lattice
· Module operating voltage: 5V
· Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
· With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
· Modules with input and output interfaces support mult..
Specifications:- Input voltage: DC 12-50V (not more than 50v), over 2A- Power input interface: 5.5*2.1mm DC socket- Playable music format: only wave square music can be played- Audio input: Bluetooth connection to mobile phone (mobile phone searches for the Bluetooth device M18)- Product size: appro..
Features: 1. The concave design, do not waste bread board space.2.2-way distribution may have disconnected, you can choose 5V, 3.3V voltage.3. The power supply can be powered via USB and DC head4. Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V.5. On-bo..
>>> Manual: Contact Us <<<Principle Introduction:The MC106B catalytic combustion gas sensor works according to the principle of catalytic combustion effect. The detection element and the compensation element are paired to form an arm of the bridge. When the flammable gas ..
More document Contact Us to download: MCP2515
Features: 1. Support CAN V2.0B technical specification, communication rate 1Mb/S2. 0~8 bytes long data field3. Standard frame, extended frame and remote frame4. Module 5V DC power supply, SPI interf..
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish ..
Description:Unit Key is a single mechanical key input unit with built-in RGB LED. The key shaft adopts Blue switch with tactile bump and audible click features. Embedded with one programable RGB LED - SK6812, supports 256 level brightness. Two digital IOs are available for key status and LED control..
Description:This is compatible R3 Mega2560 ATmega2560-16TW (upgrade version) control board with USB cable
This is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input..