Module Board

Description: This is RGB 3 color LED module for red green blue Module: KY-016 Material: PCB RGB signal output 3 color: Red, green, blue Compatible with DIY project Package included: 1/3/5/10/20 x RGB 3 color LED module (quantity optional)..

Description: RGB is LED Unit include 3 individual LEDs. It is also one of the Unit from M5GO Kit. Each one can display anycolor based on RGB value. One feature of this Unit is extension, which means you can have mutiple of them wired together. This is a very useful piece on STEM class, ..

How it display:    Dimensions:    Outer diameter: 68mm Thickness: 6.7mm / 0.3" Weight: 3.03g   Package includes:   1 x Ring..

Overviews: This case is compatible with Rock64 development board. Feature: Easy to install, fixs the board via 4 picese screws;Access to All ports of ROCK64, includes GPIO slot, USB port, HDMI port, DC port, SD card slot...With 4 rubber feet on the bottom of case, protec..

Description: JoyC is a rocker module designed for the M5StickC.It supports two-hand operation. Embedded STM32F030F4 main control chip, using I2C communication protocol and host M5StickC for data transmission. The ran ge of the joystick is 0~200, there are 12 RGB LEDs under the left and right j..

Introduction:RP2040-0.42LCD is a high-performance Development board , Integrated 0.42 "LCD (70×40 resolution).with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip.The RP2040 features a dual-core Arm Cortex-M0+ processor clocked at 133MHz with 264KB internal SR..

Introduction:RP2040-1.14LCD is a high-performance Development board , Integrated 1.14 "LCD (240×135 resolution, IPS screen, 65K RGB colors). with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip. The RP2040 features a dual-core ArmCortex-M0+ processor clocked a..

Introduction: It is the original Raspberry Pi camera V2 version, 8 million pixels, compatible with any version of Raspberry Pi.  Note: Raspberry Pi Zero v1.3 Camera Cable needs to be purchased separately for Raspberry Pi Zero v1.3. Parameters: ● 8,000,000 pixels● The photosensit..

Firmware: http://myosuploads3.banggood.com/products/20190407/20190407213215RR8503.03D.rar Introduction: RR83.03D is a multi-purpose and energy-efficient LCDTV control board with single/dual 8bit LVDS the resolution of LCDTV panel is up to 1920*1080. RR83.03D supports analo..

Feature:RS232 Shield is a standard communication port for industry equipment.This module is base on MAX232,which is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. The shield integrates DB9 connectors (female) that ..

Features: 1. RS422 interface, two-way communication. A B Y Z GND interface, GND can be used, super distance transmission 1000 meters.2. ESD protection with 15KV3. Increase the power of the 10 ohm current limiting overcurrent protection resistor on the board.4. TVS diode, lightning..

Overview:RS485&CAN Shield is an industrial communication module for Raspberry Pi, there are on board 2*RS485 Bus and 1*CAN Bus communication interface via SPI interface. CAN bus and RS485 bus powered through separated isolation power module, signal between the transceiver and the controller..