Module Board

Specification:Input: 3V - 35V Output: 4V - 40V adjustable Efficiency: 94% (MAX) Module size: 37mm x 32mm x 15mm (L x W x H) Operating temperature: -40 ℃  -  85 ℃ Load capacity: 80W (MAX) Mode of connection: Wiring terminals are free of soldering, IN is input, ..

Specifications:Input voltage: 7 - 26V Output voltage: 5V Output current: 3A (Max), the current should be controlled within 1.6A for working long hours Conversion efficiency: 96% (Max) Output ripple: < 30mV Operating temperature: -40℃ - 85℃ Dimension: 22.3 x 17 x 4.2mm (L x W x H)Package included..

Descriptions:Auto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, th..

Specification:1.Input Voltage: DC10-14V 2.Standby Current: 90dBm 6.Remote Control Distance: >100 meter(In open environment) 7.Decoding Way: MCU Software decoding 8.Can store the number of remote control:50 9.Support remote control type: Fixed code, learning code 10.Channel: 1CH 11.Multiple working..

Instruction: Contact UsSpecifications:Power Supply: DC 12V Temperature Control Range: -55℃-120℃Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)Color of Displaying: red/blueMeasurement accuracy: ±0.1°CControl accuracy: 0.1°CSensor: NTC10K Waterproof sensorOutput: Relay Contact Capacity ..

Features: Size: 50 x 33 x 10mmLCD 12V 5V +3.3 V voltage conversion board 5V, 3.3V power board BenQ power supply board commonly usedFor a variety of brands of LCD monitors and a variety of weak in line with this power supply equipment(12V-5V-3.3V) DC to DC circuit board 12VDC to 5V to ..

Note: This version can not compatible with OS system Features: Opening original schematic design, free development software interface download, also allow your needs to be modified, easy and convenient to download the program. Can simply use sensors, all kinds of electronic components ..

Features:1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors 2.Built-in TSD, without worrying about motor stall 3.Ultra-small size, suitable for assembly and carSpecification:1.Module supply voltage: DC 2V-10V 2.Signal input voltage: DC 1.8-7V 3.Single wo..

Description:   1MB (8Mbit) Flash size. AP, STA, AP+STA modes available. Very simple AT commands, easy to use. Low-power consumption and small Internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. AT commands firmware. New IC ESP8266ex This module just have small upgradation o..

Feature: Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: DTR, RXD, TX, VCC, CTS, GND Pitch: 2.54mm ..

Specifications: Model:G6S-2Size:14.8 mm(L) X 7.3 mm(W) X 9.2 mm(H)Rated Voltage:DC5V/12V/24VRated Current:28.1/11.7/8.3 mAContact From:DPDTRated Load:0.5A at 125VAC / 2A at 30VDC Package Included: 5 x G6S-2 5VDC / 12VDC / 24VDC Relay Module..

Description: GROVE2GROVE is a GROVE extension connector. Two female GROVE port sit back-to-back. One common use of this part is for the RGB LED strip extension. Package Included: 5 x Grove to Grove Connector Grove Extension Board..