Module Board

Specification:Frequency: 500MHz/1GHz/2GHz(optional)Input and output interface: SMA (2 heads are outer spiral inner hole)Input and output impedance: 50 ohmsS21 parameters, refer to the measured curve for detailsMaximum withstand power: ≤10WUsing CNC aluminum alloy shell, performance indicators are fa..

Description:   Model: ADS-B 1090MHZ antenna Gain: 2.0dBi Frequency range: 1060-1120 (MHz)   Package included:   1 x ADS-B 1090MHZ antenna..

Description:The RF front end is designed by two level low noise amplifier and two stage special filter. It is used for RF amplification of the front end of the ADS-B receiver. It has the characteristics of high gain, low noise and wide dynamic range.Specification: 1. Working voltage: 3.3-5.0V (DC)2...

Feature:1G-1.2GHzLength: 105MMWidth: 46MMWeight: 23 gramsPackage includes:1 x Bandpass Filter..

>>>Code for : Contact Us<<< Introduction: The AHT10, a new generation of temperature and humidity sensors, sets a new standard in size and intelligence: it is embedded in a dual-row flat leadless SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1..

Description:The Air105 chip is equipped with a high-performance M4 core with a maximum frequency of 204Mhz, built-in 640KB SRAM and 4MB flash. Using QFN88 package, the size is only 10mm×10mm, there are 56 programmable GPIO pins, the chip has built-in rich peripheral resources, not only provides UART..

Specifications:Model: AK-DB32B-PROInput: 5V/250MA (Over 5V may damage the light board. The current can be greater than 250ma, there is no fixed upper limit)Some power supplies have fast charge and high voltage output function, please do not use this kind of chargerOutput: about 2.5WInput port: Micro..

Specifications: Model: AK370Color: BalckMaterial: Aluminum AlloySize: 125x75x40mmbluetooth: SupportInput voltage: DC 12V/ AC 220VRMS power: 20W+20WMax power: 200W+200WChannel: 2CHLoad impedance: 4-16ΩSNR: >90 dbFrequency: 20Hz-20KHzDistortion rate: 0.01% ..

Introduction:This new Raspberry Pi 4 aluminum alloy shell, in addition to its exquisite appearance, has a unique design, breaking the traditional design concept, placing the fan exhaust buckle on the side, which does not affect the overall appearance, but also increases the heat dissipation . Featur..

The Raspberry Pi 4 Mainboard is not included, if you need the board, please Contact Us:Overview:Latest Armor Aluminum Alloy Protective Case that fits Raspberry Pi 4 Working with Cooling Fan , higher Heat dissipation efficiency Easilly Assembled in 3 steps 6 Color Available for choi..

Description:This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model b, so this armor case is only fit to raspberry pi 4 model b.There are two version: without fan version and with dual fan version to meet different needs.And this is the DUAL FAN VERSION, Contact Us&n..

Features: ● CNC machining of aluminum alloy - Precise process and accurate hole position.● Ultra-thin design - Only 14 mm thick.● Passive cooling structure design - can achieve the ideal heat sink support, heat sink CPU and memory.● Machining accuracy of CNC machine tools, sandbla..