Module Board

Feature:Maximum input voltage 16vMaximum current 2ABuilt-in input anti-reverse protectionUltra low pressure dropLength, width and height 35*13*14Weight: 9 gramsPackage includes:1 x L-C Power Filter..

Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43 x 43 x 27mm Note: This module has a ..

Features: PCB size: 1.5 x 1.9cm Working voltage: 5V Output high level when receive laser signal Output low level when not receive laser signal Note: The sensor uses a non-modulated laser receiver, please use indoors where no light, sunlight or other fixtures may interfere, recommended fo..

Description:   This is one of the communication devices among M5Units, a Laser receiver. It is mainly built with a laser transistor.  Laser communications devices are wireless connections through the atmos phere. They work similarly to fiber-optic links, except the beam is tra..

Description:  PCIE, PCI dual-slot design, compatible with all desktop computers. The relay is physically insulated and does not burn the motherboard. Four-channel POWER SW design does not affect the original power button boot function, easy installation. Computer motherboard powe..

Description:1. Working voltage: DC 5V2. Working current 7-12MA3. One power indicator light, four water level indicator lights4. Four water level output interfaces (low level 0V, high level 3.7V),for MCU IO5. Four water level sensor interfaces (2P XH2.54)6. Size: 32mm X 28mm X 11mm(With Pin),32mm X 2..

Specification:Interface: 50 PIN RGBInput Port: DC005 SocketInput Voltage: 5V~12VCurrent: 1ASIze: 91x71mmInput: 1 channel VGA signal input; 2-way AV signal ; One channel of HDMI-compatible signal input, and this IC supports hdmi1.2; 1-way reverse signal inputSupport TTL signal output, Can support: AT..

Note: Some stocks have a USB interface and a small button for firmware upgrade. If there is a problem with the firmware during use, you can contact customer service to inquire about firmware upgrade. Part of the inventory is without the upgraded version, and the two versions are shipped randomly. Pl..

Specifications: Resistor: 0.1ω-50Mω Capacitor: 25pF-100000uF Inductance: 0.01mH - 20H Working power: DC-9V Standby current: 0.02uA Operating current: 25mA Material: Metal+Plastic Size: about 11.1cm/4.37"x2.6cm / 1.02"x8.5cm/3.34" [Conversion: 1cm=0.3937 inch, 1inch=2.54 cm] ..

Overview:LCUS-2 USB relay module equipped with stable performance USB to serial chip and microcontrollers, you can control the two relay on and off by send serial command on the computer.   Feature:   1. Onboard high-performance microcontrollers chip 2. Onboard CH340 USB control chip 3. Onboard po..

Description:  Multilingual control. Mobile APP remote control. Multiple sets of timing switches. Timing cycle. Delay switch. It can be interrupted at any time. Maximum current: 10A Voltage: 90 - 250V Maximum power: 2200W Standby power:..

Features: - Single touch,using the principle of capacitance touch .The default function is switch,dimming,with brightness memories LED touch dimming.It will light slowly when turn on the lights,and become dark slowly when turn off,which effectively avoid the stimulation to eyes.- The lamp b..