Motor PWM Speed Controller

Specifications: - Input Voltage: DC6V-24V- Maximum Current: 3A- Speed Range: 0-100%- Size: 57x 37x 21mm- Weight: 53g- Can be connected to the normally closed switch to realize the positive and negative limit function.- The relay is reversed and reversed. There is no lo..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Features: - This item has new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling.- It can easily adjust the output voltage on a scale of 0-100% (nonlinear)..

Features:This controller uses novel bi-directional high-power SCR. It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire. The output voltage is adjusted anywhere between 0V ~ 220V for use with electrical appliances. It can use to such as ele..

Features:With forward, reverse bidirectional toggle switch.The motor speed controller makes it possible to control the speed of the motor and the direction of rotation.Speed type: flow controlInput voltage: DC10-55VPower(Max): 300WContinuous current: 60AMaximum current: 100AControl range: 0-100%Freq..

Feature:20A large current to drive 1200W motor, dual power tube design, variable speed 0-100%Input voltage: DC10-60VOutput voltage: Load Linear Output Current: 0-20A Continuous power: 1200W Speed Type: adjusting flow Speed mode: potentiometer (linear) Speed range:..

Feature:With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors. It has several functions:1. Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed contro..

Specification: Operating voltage: DC 12V-36VOperating Current:..

Features: Mini wide voltage DC motor governor, using the latest low voltage drive technology, suitable for voltage wide DC5-35V (5-9V input needs to be shorted), with self-recovery fuse, also suitable for LED dimming. Specifications: Operating voltage: DC5V-35VOutput current: 0-..

Description:Item type: Control BoardDrive Voltage: DC7-12VWorking Current: ≤1.2ASpeed Range: from 0% to 100%Phase Inversion Control: YesOvercurrent Protection: YesShort Circuit Protection: YesHow to identify the 4-wire motor common port: with a multimeter resistance * 1 are the amount of gear the fo..

Specification:Product name: PWM Speed Control BoardWorking voltage: DC8-24VOutput 5V PWM frequency: 18KHZDuty Cycle: 0%-100%There are start/stop switches and forward/reverse switches on the driver board, which need the support of the motor itself.Package Include:1×PWM Speed Control Board..

Specification:Input voltage: DC 9-55VOutput voltage: load linearOutput current: 0-40AContinuous power: 2000WSpeed regulating type: current adjustMode of speed regulation: potentiometer (linear)Speed range: 0 - 100%Control frequency: 25KHZType of wiring: palisad te..