OSCH02H 2 Channel USB PC Virtual Digital Oscilloscope 100MHz Bandwidth 1GSa/s Sampling Rate Logic Analyzer

Connector type :

2 channels with BNC sockets, 20 mm spacing.

Vertical resolution:

8 Bit ~ 13 Bit .

Maximum sampling rate (S/s):

250M (real time), 1G (equivalent)

Bandwidth ( −3 dB):

100MHz

Input coupling:

AC/DC.

Input characteristics:

1MΩ || 25pF.

PC OS requirements:

Windows XP, Win 7, Win 8.1, Win10 (32 bit and 64 bit).

Over-voltage protection:

±60.0v (x1), ±600.0v (x10). (DC + AC peak)

Triggering type:

Rising/falling edge according to trigger level, Pulse width trigger.

Triggering mode:

None, auto, normal, single.

Pre-trigger capture:

1%~99% of capture size.

Automatic measurements:

Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value.

Frequency response mapping

Scanning the frequency, record the process frequency and magnification data, and draw the frequency response curve.

Measurement statistical curve:

The historical trend of the automatically measured quantities can be plotted for statistics and analysis.

Pass / Fail detection:

You can set the upper and lower limits of the measurement quantity, and perform Pass / Fail detection and fault alarm function on the measured signal.

Deep measurement:

With this function, the waveform jump points are automatically numbered and marked, and the time difference between the two adjacent numbers is automatically displayed.

Samples Interpolation:

Linear or sin(x)/x.

FFT:

1024 ~ 16K points.

FFT window function:

Rectangle, Hanning, Hamming, Blackman.

Math:

A+B, A-B, AxB, X-Y.