- Stock: In Stock
- Model: ST230047793
- SKU: ST230047793
This is multi-function inverter/charger ,combining functions of inverter, PWM solar charger and battery charger to offer uninterruptible power support with portable size .Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current .AC/Solar charger priority ,and acceptable input voltage based on different applications
Featurs:
Pure sine wave inverter
Built-in PWM solar charge controller
Configurable input voltage range for home applicances and personal computers via LCD setting
Configurable AC/Solar Charger priority via LCD setting
Configurable AC/Solar input priority via LCD setting
Compatible to mains voltage or generator power
Auto restart while AC is recovering
Overload/over temperature/ short circuit protection
Smart charging system optimizes battery performance
Cold start function
Take 260Wp PV module as an example.
After considering below two parameters, the recommended module configurations are listed as below table.
When selecting proper PV modules, please be sure to consider below parameters:
1.Open circuit Voltage (Voc) of PV modules not exceeds max. PV array open circuit voltage of inverter.
2.Open ci*uit Voltage (Voc) of PV modules should be higher than min, battery voltage
Basic System Architechture:
The following illustration sgiws basic application for this inverter/charger .It also includes following devices to have a complete running system :
Generator or Utility
PV modules (Option)
Consult with your system intergrator for other possible system architectures depending on your requirements .This invertert can power all kinds of applicances in home or office environment ,including motor-type applicances sucha as tube light ,fan,refrigenrator and air conditioner
Note:For Parallel model installation and operation ,please check separate paralllel installel installation guide for the details
1 LCD display
2.Status indicator
3.Charging indicator
4.Fault indicator
5.Function buttons
6.Power on/off swtich
7.AC input
8.AC output
9.PV input
10.Battery input
11. Circuit Breaker
12. RS232 communication port
13.Parallel communication cable (only for parallel model)
14.Current sharing cable (only for parallel model)
15.Dry Contact
Package Including :
The unit x 1
User Manual(English) x 1
Communication cable x 1
Specification:
Model Name | PS-3KVA | PS-5KVA |
Rated Power | 3000VA/2400W | 5000VA/4000W |
Input | ||
Voltage | 230VAC | |
Selectable Voltage Range | 170V~280VAC(For Personal Computers);90~280VAC(For Home Appliances) | |
Frequency Range | 50 Hz/60 Hz(Auto detection） | |
Output | ||
AC Voltage Regulation (Batt.Mode) | 230VAC ± 5% | |
Surge Power | 6000VA | 10000VA |
Efficiency(Peak) | 95% | |
Transfer Time | 10ms (For Personal Computers) 20ms(For Home Applicances) | |
Waveform | Pure Sine Wave | |
Battery&AC Charger | ||
Battery Voltage | 24VDC | 48VDC |
Float Charging Voltage | 27VDC | 54VDC |
Overcharge Protection | 30VDC | 60VDC |
Maximum AC Charge Current | 30A | 60A |
| ||
