Universal Infrared Induction Auto Lock Anti-slip Car Air Vent Phone Holder Stand for Samsung Xiaomi
- Stock: In Stock
- Model: ST22023637
- SKU: ST22023637
$16.63
Ex Tax: $16.63
Specifications:
Material: Plastic
Color: Random
Size: 88x115x41mm/ 3.5”x4.5”x1.6”
Installation place: Fits for most of the fixed support on auto air vent
Fits for: Phone of 55-80mm(2.2”-3.1”) width
Features: 1. Dynamic & Static Mode
-Dynamic: Connect to power supply and put the phone on the holder, the motion arms will automatically move towards to the phone and stop until the phone is clamped tightly.
-Static: After the phone is clamped tightly, you can disconnect the power, the distance between the motion arms has been set up as same as the width of the phone.
2. Automatic motion arm to fit the phone
3. Charge for cell phone
Note: Please take off phone case before using it.
We will deliver good at random, pls carefully buy if you mind. Thanks for your understanding in advance!
Use Instruction: 1. Put the nut on the clamp ball, insert the ball into the screw hole at the back of the product, screw the nut tight.
2. Connect the product with power cable to the power supply.
3. Sliding your phone into the holder from the top of the motion arms, the motion arms will automatically clamp the phone. And the motion arms will automatically reset once the phone is taken away.
Package Included:
1 x Phone Holder(wihout phone charging cable)
1 x Micro USB Cable
2 x Rubber Accessory (2 pcs)
1 x Nut
1 x Clamp Ball
Material: Plastic
Color: Random
Size: 88x115x41mm/ 3.5”x4.5”x1.6”
Installation place: Fits for most of the fixed support on auto air vent
Fits for: Phone of 55-80mm(2.2”-3.1”) width
Features: 1. Dynamic & Static Mode
-Dynamic: Connect to power supply and put the phone on the holder, the motion arms will automatically move towards to the phone and stop until the phone is clamped tightly.
-Static: After the phone is clamped tightly, you can disconnect the power, the distance between the motion arms has been set up as same as the width of the phone.
2. Automatic motion arm to fit the phone
3. Charge for cell phone
Note: Please take off phone case before using it.
We will deliver good at random, pls carefully buy if you mind. Thanks for your understanding in advance!
Use Instruction: 1. Put the nut on the clamp ball, insert the ball into the screw hole at the back of the product, screw the nut tight.
2. Connect the product with power cable to the power supply.
3. Sliding your phone into the holder from the top of the motion arms, the motion arms will automatically clamp the phone. And the motion arms will automatically reset once the phone is taken away.
Package Included:
1 x Phone Holder(wihout phone charging cable)
1 x Micro USB Cable
2 x Rubber Accessory (2 pcs)
1 x Nut
1 x Clamp Ball
