- Stock: In Stock
- Model: ST22001608
- SKU: ST22001608
Notice: The cinema camera is NOT included in package. Only includ the mount for installing these cinema camera.
Introduction:
Almost as if it came out of the "honey, I shrunk the kids" movie from 1989. Things are getting big!
Let's introduce our latest member to our ProTek family, the all-new iFlight ProTek60 Cinelifter!
We've came a long way with action cameras, offering outstanding quality with little weight and a small footprint. But do you want to get professional or shoot some commercials, maybe get into cinema videography? Well, then you need to step up your game. Those cameras offer higher quality but bigger lenses, higher weight in exchange with all the dynamic range, color profiles and crisp footage you might possibly want.
This rig was designed for a Komodo, Zcam, BMPCC or even a GH5. It fits right onto, safe and tight.
Recommended battery size: 6S 3700mAh - 6S 4400mAh
Estimated flight time: 3-6 min (depending on battery and your take-off weight)
Features:
1.Protected Propellers for indoor and outdoor use, protecting whatever you might bump into from nasty cuts
2.Universal camera mount and accessories for a wide range of cameras to install
3.iFlight ESC Commander PCB // Power distribution board with high capacitance and heat dissipation
4.Single X-Class grade ESC motor drivers for more power and reliability
5.Big size XING2 3110 // The power motors with extreme lift and flight performance
6.GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)
7.Up to 110 km/h // 1.5 kg payload // Total lift off weight up 3.5 kg (recommended max. MTOW)
Description:
Item Name: ProTek60 Pro 6inch FPV Drone
BLITZ F7 Flight Controller
SucceX X80A X-Class ESC
Motor: XING2 3110 1600KV
GPS module: iFlight M8Q-5883-GPS & Compass V2.0 (LINK)
Wheelbase: 282mm
Body Size: 380*351mm
Top and bottom plate spacing: 35mm (aluminum standoff height)
Propeller size: 6 inch
Weight: 1330g (without battery)
FC // BLITZ F7
MCU: STM32 F722
Gyro: MPU6000
Baro: NO
OSD: AT7456E
BEC:5V 2.5A
BlackBox:32MB
UARTs: 6
Smart audio / IRC Tramp VTX protocol supported
WS2812ledStrip: Yes
Bepper: Yes
Firmware Target: IFRC-IFLIGHT_BLITZ_F722
Mounting pattern: 30.5*30.5mm/φ4
Dimensions: 36.5*35mm
Weight: 7.8g
ESC // iFlight ESC Commander PCB (4x SucceX X80A)
MCU: G071
Capacitance per ESC: total 240UF Low ESR
Current Sensor: Yes
Input: 2-8S LIPO
BlHeli32 telemetry: Yes
BEC: No
Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM Drive
Firmware Target: iFlight-BL32-PRO
Weight:8.1g
Dimension: 40*17mm
Package included:
1 x Pre-built and tested ProTek60 Pro
1 x Fullsend X 6S 70C 4400mAh
1 x DJI FPV Air Unit Module + Camera
2 x Albatross LHCP 5.8GHz 100mm SMA FPV Antenna
4 x 6x4x3 Propellers (Color may vary)
2 x iFlight Lipo Strap 20*300mm (Black)
1 x Prop Wrench
1 x XT90 Male to XT60 Female Adapter Wire
