Robot Arm & Tank

OverviewEquip your Raspberry Pi with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic. This starter robotic arm kit includes: servo driver HAT, metal mechanical arm structure, and 4x metal gear servos. When used with the Raspb..

Description: SG90 Servo: Technical data given by the manufacturers: Size: 21.5mmX11.8mmX22.7mm Weight: 9 grams No-load speed: 0.12 seconds / 60 degrees (4.8V) Stall torque of 1.2 - 1.4 kg / cm (4.8V) Operating temperature: -30 to +60 degrees Celsius Dead-set: 7 ..

Description: Product: Smart RC Robot Arm Car Control: Wireless Stick Wheel: Omni Wheels Program: Support Product Base Size: 19.5*16.3*5.6cm   Features: - DIY design, free to assemble - Support graphic program - With ultrasonic module, support ..

Introduction:This is a robotic arm produced with 3D printing technology, using 4 sg90 steering gears, with reasonable design and stable structure.Size: length, width and height about 17*7*17cmSpecification:Item Name: 3D Printed 4DOF Robot Arm Size: 17*7*17cmMaterial: PlasticColor: WhiteFit for: SG90..

Description:   Standard 2.54 pins connected directly by Dupond cable; The motor can be powered individually or by the system; GND and VCC; IA, IB input signal; Speed: speed monitoring port; M.P- / M.P+: cathode / anode of the motor. Material: Plank, acrylic Application: For SCM DI..

Features:Small bodyStainless steel, strong and durableBuilding blocks assembling toys3-9v wide range voltageTT motor has strong versatilityCan install a variety of circuit boardThe motor welding place is glued and fixed for easy reuseTechnical Parameters:Model: SN11002Weight: 650Single layer size: 2..

Description: Product: RC Robot Tank Materials: Acrylic+Electronic Components Power: 4* 18650 Lipo Batteries(not included) Controller: 2* AA Batteries(not included) Motor: 33GB520 Voltage: 9-12V Arm Extension(max): 230mm Gripper Extension(max): 75mm Base loading We..

Stainless Steel Manipulator 5DOF Rotating Assembled Robot Arm Clamp Claw Mount With 5pcs Servo Specification: Name: 5DOF Robot Arm with clamp claw mount and servo  Type: DIY robotDegree: 5 degree of freedomMaterial: Stainless steelFo..

Description:Product: RC Robot CarPower: 7.4V Lipo BatteryServo: TBS2701 Digital ServoMain Board: STM32Speed: 0.5m/sClimbing Angle: 25°Bearing Weight: About 3kgWeight: About 2.2KgProduct Size: 290*260*250MMFeatures:- Support local and..