Raspberry Pi & Orange Pi

Description:-This mini OLED is design for Raspberry Pi computers, to give you a little display.-The PiOLED comes with a monochrome 128x32 OLED, with blue pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and co..

Descriptions:The colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation. Package Included: 1 x Copper Sheet 2 x Aluminum Sheets..

Features: 1. The case is made of acrylic, it is transparent when you tear off the protective film. After you installed thecase, it is unfolded, so you can view your Raspberry Pi clearly. What's more, the case won't affect the WiFiand Bluetooth signal of your Raspberry Pi.2. The superimposed layer by..

Specification:Material:GlassPixel: 800xRGB (3) x1280Show area: 135.36x216.576Panel Size: Approx. 10.1 inchesSize: Approx. 143x228.6x2.7mm/5.63x9x0.1 inchesBrightness: 250 (TYP)Interface: MIPIBacklight: 27-LEDS (White)Operating temperature: 0 ~ 50 ℃Storage temperature: -10-60 ℃Drive IC: ILI9881CFeatu..

Description:1. A POE splitter can split the POE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-POE devices can be powered over Ethernet.2. The splitter complies with the IEEE802.3af/at standard and can provide DC 5V power supply for network terminals below 15W.3. The spli..

Feature:Material : BrassPackage included:100 x Brass cylinders (M2.5 x 11 + 6) 100 x Screws ( Pm2.5 x 5) 100 x Nuts( M2.5)..

Features:Compatible at the same time: Raspberry Pi (4B, 3B+, 3B) and Jetson Nano (A02, B01) development boardsInterface: 12-inch LCD screen has various interfaces, which can be connected to Raspberry Pi via HDMI, as well as VGA, AV, USB, TV, audio and other interfacesBuilt-in audio output: no need f..

Feature:Pin length: 12mm Material: ABS + stainless steelPackage included:1 x 40Pin Female Header..

15pcs Adhesive Aluminum Heat Sink Cooler Kit For Cooling Raspberry Pi Description: The Heatsink have a layer of adhesive on the back of them. Simply peel the adhesive off and stick onto your board This heatsink set is specially designed for Raspberry Pi, it's function is to cool down the boa..

Description:This camera is suitable for Jetson Nano and Jetson Xavier NX. It adopts IMX219 chip and CSI interface. The pixel is 800W, resolution is 1080P, and the field of view angle is 77°, 120° and 160°. It can be used to neural network, AI vision, real-time image recognition, AI smart robot cars ..

1Pc 4 Colors Aluminum Alloy Protective Case With Cooling Fan For For Raspberry Pi 2 Model B/B+Features:  - Access to all ports of the Raspberry Pi Model B+ - Plug and Play Cooling Fan,protect your Pi from Overheating - 4 colors to let you chose: Blue, Gray, Red, Black Packa..

Package Include:1* Metal Case1* Screws Kit..