TMC5160TA-V1.0 StepStick Super Silent Stepper Motor Driver For Reprap 3D Printer with StealthChop/SpreadCycle
- Stock: In Stock
- Model: ST230048718
- SKU: ST230048718
$17.00
Ex Tax: $17.00
Features:
• Super quiet, anti-jitter.
• The TMC5160TA-V1.0 single-axis stepper motor control driver IC with serial communication interface can be externally expanded MOSFET.
• Each coil motor current up to 20A, the maximum voltage of 60V DC.
• Supply voltage 9-36V (limited by the MOSFETs)
• I phase,RMS up to 2.8A
• Configuration & Control via SPI
• S/D mode selectable via solder option
• Use with optional lowESR ELCO, ca. 150uF
• Board width 1.5", board height 1.1"
• 2x11 pin 0.1" header rows for pins/connectors
• All stepper motor logic runs inside TMC5160 - when driving NEMA17 to NEMA34 and larger motors, no software is required, just hardware is used.
Superiority:
1.high-power stepping drive control IC
2. super quiet
3.Prevent vibration
4.TMC5160 control/drive intelligent IC, make stepping motor performance more powerful
Parameters:
Product Name: TMC5160TA-V1.0 Stepper Motor Driver
Size: 38*27*1MM
Supply voltage: 9-36V(limited by the MOSFETs)
Current: 2.8A
Microsteps: Up to 256
Package Included:
1 x TMC5160 Stepper Motor Driver
Package Included:
1 x TMC5160 Stepper Motor Driver
Mode Selection:
• Soldering R2 / not R1 = Internal ramp generator active with Trinamic’s 6-point-ramp (default mode)
• Soldering R1 / not R2 = Step/Direction interface active for use with external motion controller (STEP = REFL, DIR = REFR)
