200mW 650nm Red Laser Module Plant Grow Light Source Vegetables
- Stock: In Stock
- Model: ST220016853
- SKU: ST220016853
1,436.41Rs.
Ex Tax: 1,436.41Rs.
Specifications:
Band Range: VisibleLlight
Mode Of Operation: Continuous
Incentive Method: Electric Excitation
Working Substance: Semiconductor
Item | Parameter |
Dimensions | Φ12mm*15mm |
Wire Length | 15cm |
Wavelength | 650nm |
Output Power | ≥75mW |
Input Voltage | 3V |
Input Current | 150-160mA |
Storage Temperature | -40℃ - 80 ℃ |
Working Temperature | -10 ℃ - 75 ℃ |
Wire Length | 150mm |
Irradiation Distance | 8M |
Lightspot Size | <10mm |
Service Life | 8000H |
Features:
- This product is closer to the wavelength band of sunlight emission than ordinary LED light source, which is more conducive to plant absorption and chlorophyll formation;
- The 650 nm source directly promotes the germination and growth of plants, and the irradiated plants are significantly stronger and healthier than the unirradiated plants.
Cautions:
1. The laser light emitted by laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. Laser module need appropriate laser driver(PBC).When laser moudle connect with power supply,please set the output voltage to zero.The adjustment of current should be slowly increase or decrease to avoid damaging the device.
3. Keep the device working or storing in dry environment.
4. Working at high temperatures will increase the threshold current,reduce conversion efficiency and speed up the aging of the device.
5. When output power is higher than it's specific parameter of operation,it will accelerate the aging of the device.
6. When the operation temperature of laser diode is over 70℃,please do well heat dissipation of it.
7.This laser moudle is electrostatic sensitive device.Please make sure ground yourself or wear an antistatic wrist strap before you take it.
Package Included: 1 Pcs x Plant Growth Light Laser Module
Cautions:
1. The laser light emitted by laser module is likely to injure persons'eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. Laser module need appropriate laser driver(PBC).When laser moudle connect with power supply,please set the output voltage to zero.The adjustment of current should be slowly increase or decrease to avoid damaging the device.
3. Keep the device working or storing in dry environment.
4. Working at high temperatures will increase the threshold current,reduce conversion efficiency and speed up the aging of the device.
5. When output power is higher than it's specific parameter of operation,it will accelerate the aging of the device.
6. When the operation temperature of laser diode is over 70℃,please do well heat dissipation of it.
7.This laser moudle is electrostatic sensitive device.Please make sure ground yourself or wear an antistatic wrist strap before you take it.
Package Included: 1 Pcs x Plant Growth Light Laser Module
Tags:
Laser Module