UL007 65W 0~6A Adjustable Constant Current Electronic Load MicroUSB Interface with Switch
- Stock: In Stock
- Model: ST22010908
- SKU: ST22010908
$21.99
Ex Tax: $21.99
Basic parameters:
Power: Maximum power 65W
Voltage: DC4~24V
Current: 0~6A
Note: Exceeding the parameters will damage the load:
65W is the total power, that is, no more than 3.25A at 20V, and no more than 5.42A at 12V
At 5V, the maximum current is 6A, so at 5V, it does not exceed 6A.
Operation switch:
1. Button: load fast switch, short press is effective
2. Multi-turn precision adjustable resistance: adjust the current clockwise to increase the current, counterclockwise to decrease the current
Input interface:
The three input ports are connected in parallel, pay attention to high voltage, one high voltage, all high voltage
1. USB-A male connector: 4P, compatible with ordinary A port charger, A port meter
2. MicroUSB interface: compatible with old MicroUSB wire insertion (note that the current should not exceed 2.5A, preferably not more than 2A)
3. TYPE-C female socket: compatible with CC line, AC line plug-in (for large current, please use C port input)
Both pins of TYPE-C female CC1 and CC2 are connected with 5.1k pull-down resistors, which can directly activate the 5V output of the PD charging head
Indicator light:
Three indicator lights
Blue power indicator light: load input voltage, light up (input voltage is too low, no light)
Red warning indicator: over power, over voltage, under voltage, over current, high temperature warning
Green load working indicator: when the load is on, the light is on; when the load is off, the light is off
The meaning of flashing red warning light:
Steady light: over power warning
Single flash: over current
Single slow flashing: overvoltage
Fast flashing 2 times: undervoltage
Fast flashing 3 times: high temperature warning
Package included:
1 x 0~6A Adjustable Constant Current Electronic Load with Switch
