Search

Description:   The module adopts high quality 30A relay, and the maximum load is normally open interface: AC 250V/30A, DC 30V/30A; The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA; Module working voltage: 24V Can..

Description:   Maximum load: AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage: 24V. Every channel of the module can be set high or low level trigger by jumper. ..

Description:   Normally open interface maximum load: AC 250V/10A, DC 30V/10A. SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA. Fault-tolerant design, the relay will not move even if the control line is broken...

Description:  Normally open interface maximum load: AC 250V/10A, DC 30V/10A. SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA. Fault-tolerant design, the relay will not move even if the control line is broken. Power indicator (gree..

Features: 1. This module meet safety standard, control areas and load area have the isolation groo;2. The double FR - 4 circuit board design, high-end SMT process;3. The relay control;4. it have power and relay operation instructions, and bright, disconnect the da1wn; ..

Specifications:Product Name: 1-way Relay ModuleOperating voltage: 6--30V support micro USB 5.0V power supplyThe trigger source: High trigger (3.0V-24V) signal with no common ground system to improve anti-jamming capability of the system (also self-shorting common ground)Output capability: You can co..

Description:1. High quality materials, safe and stable.2. Built-in LED indicator,with socket base.3. Transparent flame resistant shell,durable and reliable.4. Silver-gilt contact, good electrical conductivity.5. Widely used in automatic adjustment of circuit, safety protection, switching circuit and..

Description:The split charge relays are CE approved products with a red LED indicator and allows the split charging of a second battery without discharging the primary battery or the start battery.Product Specifications:Name: Automotive Dual Battery Digital Display Isolator Relay Protection Voltage ..

Specifications:Product Name: 1CH Relay ModuleDimensions: 64.2mm*34.8mm*18.5mmRelay capacity: AC220V10A or DC30V10AQuiescent current: 20mA Working current: 50mAWorking voltage: 10~16VSignal voltage: 4V~20VService life: ≥100,000 timesWorking temperature: -40~85℃Features:1. New upgrades, simplifying co..

Description:  Working voltage: DC 6-24V Working current: 60-70MA Standby current: 1UA Load current : AC 250V/10A, DC 30V/10A Trigger mode: Low pulse trigger Size: 48mm * 16mm  * 18.5mm (L * W * H),  Very small size Weight: 14.3 g USE 1:By default, t..

Feature:This is 1 channel Relay module, can able to control various appliances, and other equipment with a current not more 10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need power 5V an..

Product Description: 1. AC voltage 250V, AC current 10A, DC voltage 30V, DC current 10A;2. It adopts 8550 triode drive and has strong driving ability;3. Operating voltage 5V, Vcc pin 5v input4. With fixing bolt holes for easy installation5. Board size: 4.3 × 4.4 (cm)6. Pow..