Description:
The module adopts high quality 30A relay, and the maximum load is normally open interface: AC 250V/30A, DC 30V/30A;
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA;
Module working voltage: 24V
Can..
Description:
Maximum load: AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage: 24V.
Every channel of the module can be set high or low level trigger by jumper.
..
Description:
Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
Fault-tolerant design, the relay will not move even if the control line is broken...
Description:
Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
Fault-tolerant design, the relay will not move even if the control line is broken.
Power indicator (gree..
Specifications:Product Name: 1-way Relay ModuleOperating voltage: 6--30V support micro USB 5.0V power supplyThe trigger source: High trigger (3.0V-24V) signal with no common ground system to improve anti-jamming capability of the system (also self-shorting common ground)Output capability: You can co..
Description:
Working voltage: DC 6-24V
Working current: 60-70MA
Standby current: 1UA
Load current : AC 250V/10A, DC 30V/10A
Trigger mode: Low pulse trigger
Size: 48mm * 16mm * 18.5mm (L * W * H), Very small size
Weight: 14.3 g USE 1:By default, t..
Product Description: 1. AC voltage 250V, AC current 10A, DC voltage 30V, DC current 10A;2. It adopts 8550 triode drive and has strong driving ability;3. Operating voltage 5V, Vcc pin 5v input4. With fixing bolt holes for easy installation5. Board size: 4.3 × 4.4 (cm)6. Pow..
Feature: Rated current: 10ARated voltage: 12VOutput contact maximum: 250A 10AThe IN1, IN2, IN3, IN4, IN5, and IN6 signal lines are active low.VCC, GND power input terminal, relay can be separately powered by relay power input terminal JD-VCC. Use: 1. Support all ..
>>>Manual: Contact Us<<<Description:
WIFI module of on-board intelligent Internet of things is simple in configuration and powerful in function.
Supports the remote control of "easy micro-link" mobile phone APP through WIFI and 4G/3G/2G network.
..
>>>Manual: Contact Us<<<Description: This is 5V 8 Channel relay module board for PIC AVR DSP ARM This relay module is 5V active low. It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as , AVR, PIC, ARM, PL..
Description:
SSR-GJ series for small high-power solid-state relays, input control voltage is 3~5VDC, output adopts a unidirectional thyristor reverse parallel, dv/dt resistant ability is high, the output load voltage range of 5~220VDC. Great to meet customers various requirements in different plac..