Search

Active current output Range: 0-24mA Resolution: 0.01 mA Maximum load: 750Ω Accuracy:±(0.1% + 0.005) Passive current output Range: 0-24 mA Resolution: 0.01 mA External power supply up to 30V Accuracy: ± (0.1% + 0.005) Voltage output Range: 0-12 V Resolu..

0.5Mhz-470Mhz RF Signal Generator Meter Tester for FM Radio Walkie-Talkie Debug Descriptions: - For FM walkie-talkie debugging- Frequency 0.5M --- 470M- Signal strength -70--132dBm- Built-in 800Hz tone modulation- Use 8--12V DC power supp..

Feature:Working Voltage: DC12V Frequency: 50Hz-6.5KHz Signal Type: Sine wave, triangle wave, square wave Size: 4.5*6cmPackage included:1 x 8038 Function Signal Generator DIY Waveform Generator Kit..

Features:Main Functions-Crankshaft position sensor signal simulation output: including 9 types of gear missing teeth signal: 58+2, 58+1, 57+2, 57+1, 37+1, 36+2, 35+1, 34+2, 22+1.- One type of standard 60+0 signal simulation output.-Magnetoelectric signal or Hall signal output.-..

Features: 1. Supports 9V battery-powered, USB-powered;2. Lightweight, easy to carry and use;3. Can generate 15 different parameters;4. Different resolutions of VGA signal, can be suitable for a variety of different performance monitors. Note: The signals listed in the tabl..

Instruction: http://files.banggood.com/2017/11/SGE-8-signal-generator-kit-instructions.pdfDescription:ICL8038 is a kind of monolithic function signal generator with excellent performance. It can generate sine wave, triangle wave, square wave and square wave.Feature:Operating vo..

Installation instruction: http://files.banggood.com/2017/18.01/SG-10-Noise-signal-generator-kit.pdf Feature: White noise signal commonly known as noise, similar to the noise floor of the radio. Use is very wide, such as testing and treatment of insomnia and so on!DC 12V..

Features:This manual applies to each model of FY8300S series Function/Arbitrary Waveform Signal Generator. The last three characters of the model indicate the up limit output of Sine Wave (MHz). For example, the “60M” of the Model Number “FY8300-60M” indicates the Sine wave maximum ..

Note: Since 2021.11.29, the appearance of the shipment is as shown in the figure below.Features:- High accuracy 0.01V, 0.01mA, 0.1mV, lost cost.- User-friendly key layout, all functions have independent corresponding keys.- Fast response and zer'o delay in operation.- Low power dissi..

Description:The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. Sine wave can be used for test signals, drive signals, carrier frequency signals, etc; squar wave can be ..

Features: Rough adjustment/fine tuning Dual mode, fast and precise adjustment The number of revolutions can be set to 1-80 circles Quick mode, quick test product Automatic curve mode, aging products Passive two-wire Current Loop Signal Generator Compatible with 3 and 4-w..

Features:  • Supports 24 V power supply through wiring terminals and 5 V USB port, can be used indoors or outside the industrial site.• Rechargeable 1000 mAH 3.7 V battery integrated in the interior, very convenient to use.• High Precision 0.01 V, MA output and value of the..