Search

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Parameters Model: 17HS4023 Size: 42 * 42 * 23mm Phase number: 2 phase Rated voltage: DC 4.1V Rated current: DC 1.0A / phase Phase resistance: 4.1X (±10%) Ω / phase Phase inductance (1KHz): 4.1x (1±20%) mH / phase Holding torque: ≥130m N.cm Positioning torque: 20..

Description:1. Uniform speed, no lost step: The enhanced PCB board in the motor and the unique stator technology ensure that the stator gear of the motor is evenly polished, the inner hole has high precision, and the speed is stable and accurate during the working process.2. The structure is stable ..

Description: HANPOSE 1M XH2.54 Line Stepper Motor Cable 4 Pin Motor Connector Line Cable For 42 Stepper Motor   Specification: Type: Cable AdapterMaterial: ABS  Color: Colorful Connector: 4pinLength: 1M    Features: 1. 3D printer line XH2.54 4pin white terminal cables for stepper ..

Introductions: ● Silent step protection is an additional module step and Pololu A4988 compatible step motor driver. The board provides the motor output with a flyback diode (free rotating diode), which enables it to withstand induction voltage even when the driver is not powered. ● The v..

Description: Machitit 2/3mm Cork gasket shock absorber / Nema 17 42 stepper motor vibration damper fits for 3D printer DIY CNC part.Specification:Material: Cork woodSize: 42mm x 42mmThickness: 3mm / 2mm   Features:1. Reduces vibration transfer to printer frame.2. Greatly reduced he..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

2Pcs L298N Dual H-Bridge Stepper Motor Driver Board For Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: ..

Description: Machifit 3-5V 2 Phase 4 Wire Stepper Motor 8mm Micro Stepping MotorSpecification: Rate vlotage DC 3V Motor diameter 8mm Height 9.2mm Output shaft 0.8mm The output shaft length ..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Description: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature pr..

Specifications:Model: 17HS-C4040Fuselage: 40mmShaft Length: 23mmShaft Diameter: 5mmTorque: 0.45n. MCurrent: 1.7AVoltage: 12-24 VLine Order: ABCD two phase four wireNumber of Phases: 2Rated Voltage: DC 1.6VPhase Resistance (20℃): 1.6×(1±20%)Ω/phaseHolding Torque: ≥270mN.mSteering (looking at shaft ex..