Search

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

2Pcs L298N Dual H-Bridge Stepper Motor Driver Board For Description: Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: ..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Specification:Model: 86HSE12N-B32Drive: HSS86VAC: 18V-70VVDC: 24V-100VCurrent: 6ATorque: 12N.mRated Speed: 1000rpmEncoder LeadsEB+:yellow EB-:green EA+:black EA-:blue VCC:red EGND:whiteWiringRed:A+ Green:A- Yellow:B+ Blue:B-Features:1. Low heat (static, the current is almost zero, no heat).2. Smooth..

Description: Stepper Motor Driver Controller Speed Regulator Pulse Generator PWM Generation Controller without Magnet Specifications:Type Stepper Motor Driver ControllerSize Approx. 73*51*37mmController Frequency Signal High: 5.8KHZ-127KHZ Middle: 590HZ-15.8KHZ Low: 82HZ-2.3KHZFrequency Measurement ..

Description:1) Operating voltage DC 10V-45V. DC32V switching power supply is recommended.2) high-speed optical coupling 6N137, ensure high speed without losing step.3) Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-c..

Descriptions:TB6600 Nema17/23 Stepper Motor Driver 4.5A 40V Instead Of TB6560 2-phase Stepper Motor Driver DIY Engraving PrintingSpecifications:Product NameStepper Motor DriverMaterialPlastic, metalOutput currentIOUT = 5.0A (peak, within 100ms)Rated outputIOUT = 4.5 AInput pull-down resistor100 KΩOu..

Description: ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed high-power dr..